CR05AS Datasheet, PDF (1/3 Pages) Mitsubishi Electric Semiconductor – LOW POWER USE NON-INSULATED TYPE, PLANAR PASSIVATION TYPE

MCR100 Series
i
Sensitive Gate
Silicon Controlled Rectifiers
Reverse Blocking Thyristors
PNPN devices designed for high volume, line-powered consumer
applications such as relay and lamp drivers, small motor controls, gate
drivers for larger thyristors, and sensing and detection circuits.
Supplied in an inexpensive plastic SOT-89 package which is
readily adaptable for use in automatic insertion equipment.
• Sensitive Gate Allows Triggering by Microcontrollers and Other
Logic Circuits
• Blocking Voltage to 800 V
• On−State Current Rating of 0.8 Amperes RMS at 80°C
• High Surge Current Capability — 10 A
• Minimum and Maximum Values of IGT, VGT and IH Specified for
Ease of Design
• Immunity to dV/dt — 20 V/msec Minimum at 110°C
• Glass-Passivated Surface for Reliability and Uniformity
•
•
MAXIMUM RATINGS (T_J = 25°C unless otherwise noted)
Rating
Symbol Value Unit
Peak Repetitive Off−State Voltage^{(Note 1)} V_DRM,
V
(T_J = *40 to 110°C, Sine Wave, 50 to V_RRM
60 Hz; Gate Open)
CR05AS-3
300
CR05AS-4
400
CR05AS-6
600
CR05AS-8
800
On-State RMS Current
I_T(RMS)
0.8
A
(T_C = 80°C) 180° Conduction Angles
Peak Non-Repetitive Surge Current
(1/2 Cycle, Sine Wave, 60 Hz,
T_J = 25°C)
Circuit Fusing Consideration (t = 8.3 ms)
I_TSM
I²t
10
A
0.415
A²s
Forward Peak Gate Power
(T_A = 25°C, Pulse Width v 1.0 ms)
P_GM
0.1
W
Forward Average Gate Power
(T_A = 25°C, t = 8.3 ms)
Forward Peak Gate Current
(T_A = 25°C, Pulse Width v 1.0 ms)
P_G(AV)
0.10
W
I_GM
1.0
A
Reverse Peak Gate Voltage
V_GRM
5.0
V
(T_A = 25°C, Pulse Width v 1.0 ms)
Operating Junction Temperature Range
T_J
−40 to
°C
@ Rate V_RRM and V_DRM
110
Storage Temperature Range
T_stg
−40 to
°C
150
4(1) VDRM and VRRM for all types can be applied on a continuous basis. Ratings
apply for zero or negative gate voltage; however, positive gate voltage shall
not be applied concurrent with negative potential on the anode. Blocking
voltages shall not be tested with a constant source such that the voltage
ratings of the devices are exceeded.
1
CR05AS Series
SCR
0.8 AMPERES RMS
300 thru 800 VOLTS
G
A
K
1
2
3
SOT-89
PIN ASSIGNMENT
1
Gate
2
Anode
3
Cathode
D