TPSMA6.8A Datasheet, PDF (1/3 Pages) SUNMATE electronic Co., LTD – SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR DIODES

TPSMA6.8(A) - TPSMA43(A)
SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR DIODES
VOLTAGE RANGE: 6.8 - 43V
POWER: 400Wa t t s
Features
! _{Junction passivation optimized design}
passivated anisotropic rectifier technology
! T_J = 185 °C capability suitable for high
reliability and automotive requirement
! _{Available in uni-directional polarity only}
! _{400 W peak pulse power capability with a}
! _{10/1000 µs waveform, repetitive rate (duty cycle):}
0.01 %
! _{Excellent clamping capability}
! _{Very fast response time}
! Low incremental surge resistance
Meets MSL level 1, per J-STD-020, LF maximum
peak of 260 °C
Mechanical Data
! Case: SMA/DO-214AC, Molded Plastic
! Terminals: Solder Plated, Solderable
per MIL-STD-750, Method 2026
! Polarity: Cathode Band or Cathode Notch
! Marking: Type Number
! Weight: 0.064 grams (approx.)
B
A
J
H
G
E
SMA(DO-214AC)
Dim Min Max
C
A
2.29 2.92
B
4.00 4.60
C
1.27 1.63
D
D
0.15 0.31
E
4.80 5.59
G
0.10 0.20
H
0.76 1.52
J
2.01 2.62
All Dimensions in mm
Maximum Ratings ^TA ^{= 25°C unless otherwise specified}
PARAMETER
Peak power dissipation with a 10/1000 µs waveform ⁽¹⁾⁽²⁾ (fig. 3)
Peak power pulse current with a 10/1000 µs waveform ⁽¹⁾ (fig. 1)
Power dissipation at T_A = 25 °C ⁽⁴⁾
Peak forward surge current 8.3 ms single half sine-wave ⁽³⁾
Maximum instantaneous forward voltage at 25 A ⁽³⁾
Operating junction and storage temperature range
SYMBOL
P_PPM
I_PPM
P_D
I_FSM
V_F
T_J, T_STG
VALUE
400
See next table
1.0
40
3.5
- 65 to + 185
Notes
(1) _{Non-repetitive current pulse, per fig. 3 and derated above TA = 25 °C per fig. 2}
(2) _{Mounted on P.C.B. with 0.2" x 0.2" (5.0 mm x 5.0 mm) copper pads attached to each terminal}
(3) _{Measured on 8.3 ms single half sine-wave or equivalent square wave, duty cycle = 4 pulses per minutes maximum}
(4) _{Mounted on minimum recommended pad layout}
UNIT
W
A
W
A
V
°C
1 of 3
www.sunmate.tw