SMF501C Datasheet, PDF (1/2 Pages) SeCoS Halbleitertechnologie GmbH – 5.0 Amp Surface Mount Silicon Fast Recovery Rectifiers

SMF501C - SMF507C
SURFACE MOUNT FAST RECOVERY RECTIFIER DIODES
VOLTAGE RANGE: 50-1000V
CURRENT: 5.0 A
Features
! ^{Glass Passivated Die Construction}
! Fast Recovery Time for High Efficiency
! Low Forward Voltage Drop and High Current
Capability
! Ideally Suited for Automatic Assembly
! _{Plastic Material: UL Flammability}
Classification Rating 94V-0
Mechanical Data
! Case: SMC(DO-214AB),Molded Plastic
! _{Terminals: Solder Plated Terminal -}
Solderable per MIL-STD-202, Method 208
! ^{Polarity: Cathode Band or Cathode Notch}
! _{Marking: Type Number}
! _{Weight: 0.21 grams (approx.)}
B
A
J
H
G
E
SMC/DO-214AB
Dim Min Max
A
5.59 6.22
C
B
6.60 7.11
C
2.75 3.18
D
0.15 0.31
D
E
7.75 8.13
G
0.10 0.20
H
0.76 1.52
J
2.00 2.62
All Dimensions in mm
Maximum Ratings and Electrical Characteristics @ TA = 25°C unless otherwise specified
Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%.
Characteristic
Symbol SMF5 01C SMF5 02C SMF5 03C SMF.5 04CSMF5 05 CSMF5 06 C SMF5 07 C _Unit
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage
V_RRM
V_RWM
50
100
200
400
600 800
1000 _V
V_R
RMS Reverse Voltage
V_R(RMS)
35
70
140
280
420 560
700 _V
Average Rectified Output Current
@ TT = 75°C
I_O
5.0
A
Non-Repetitive Peak Forward Surge Current
8.3ms Single half sine-wave Superimposed on Rated Load IFSM
150
A
(JEDEC Method)
Forward Voltage
@ I _F = 5.0A _VFM
1.3
V
Peak Reverse Current
at Rated DC Blocking Voltage
@ T_A = 25°C
@ TA = 125°C
I_RM
5.0
100
mA
Maximum Recovery Time (Note 3)
t_rr
150
250
500
ns
Typical Junction Capacitance (Note 2)
C_j
78
pF
Typical Thermal Resistance Junction to Terminal (Note 1) RqJT
50
K/W
Operating and Storage Temperature Range
T_j, T_STG
-65 to +150
°C
Notes:
1. Thermal resistance: junction to terminal, unit mounted on PC board with 5.0 mm² (0.013 mm thick) copper pad as heat sink.
2. Measured at 1.0MHz and applied reverse voltage of 4.0V DC.
3. Reverse recovery test conditions: I_F = 0.5A, I_R = 1.0A, I_rr = 0.25A. See figure 5.
1 of 2
www.sunmate.tw