SMF301B Datasheet, PDF (1/2 Pages) SeCoS Halbleitertechnologie GmbH – 3.0 Amp High Efficiency Recovery Rectifiers

SMF301B - SMF307B
SURFACE MOUNT FAST RECOVERY RECTIFIER DIODES
VOLTAGE RANGE: 50-1000 V
CURRENT: 3.0 A
Features
! Glass Passivated Die Construction
! Fast Recovery Time for High Efficiency
! ^{Low Forward Voltage Drop and High Current}
Capability
! Ideally Suited for Automatic Assembly
! _{Plastic Material: UL Flammability}
! Classification Rating 94V-0
Mechanical Data
! Case: SMB/DO-214AA, Molded Plastic
! Terminals: Solder Plated, Solderable
per MIL-STD-750, Method 2026
! Polarity: Cathode Band or Cathode Notch
! Marking: Type Number
! _{Weight: 0.093 grams (approx.)}
B
A
J
H
G
E
SMB(DO-214AA)
Dim Min Max
C
A
3.30 3.94
B
4.06 4.70
C
1.91 2.21
D
0.15 0.31
D
E
5.00 5.59
G
0.10 0.20
H
0.76 1.52
J
2.00 2.62
All Dimensions in mm
Maximum Ratings and Electrical Characteristics T_A = 25°C unless otherwise specified
Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%.
Characteristic
Symbol SMF301B SMF302B SMF303B SMF304B SMF305B SMF306B SMF307B Unit
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage
V_RRM
V_RWM
50
100
200
V_R
400
600 800 1000
V
RMS Reverse Voltage
V_R(RMS) 35
70
140
280
420 560
700
V
Average Rectified Output Current
@ TT = 75°C
I_O
3.0
A
Non-Repetitive Peak Forward Surge Current
8.3ms Single half sine-wave Superimposed on Rated Load IFSM
100
A
(JEDEC Method)
Forward Voltage
Peak Reverse Current
at Rated DC Blocking Voltage
Maximum Recovery Time (Note 3)
@ I _F = 3.0A _VFM
@ T_A = 25°C
@ TA = 125°C ^IRM
t_rr
1.3
5.0
250
150
V
mA
250
500
ns
Typical Junction Capacitance (Note 2)
C_j
50
pF
Typical Thermal Resistance Junction to Terminal (Note 1) RqJT
25
K/W
Operating and Storage Temperature Range
T_j, T_STG
-65 to +150
°C
Notes:
1. Thermal resistance: junction to terminal, unit mounted on PC board with 5.0 mm² (0.013 mm thick) copper pad as heat sink.
2. Measured at 1.0MHz and applied reverse voltage of 4.0V DC.
3. Reverse recovery test conditions: I_F = 0.5A, I_R = 1.0A, I_rr = 0.25A. See figure 5.
1 of 2
www.sunmate.tw