SMDJ5.0A Datasheet, PDF (1/4 Pages) MDE Semiconductor, Inc. – SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR

SMDJ5.0A(CA) - SMDJ440A(CA)
SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR DIODE
VOLTAGE RANGE: 5.0 - 440V
POWER: 3000Wa t t s
Features
! Glass Passivated Die Construction
! Uni- and Bi-Directional Versions Available
! Excellent Clamping Capability
! Fast Response Time
! Plastic Case Material has UL Flammability
Classification Rating 94V-O
Mechanical Data
! ^{Case:DO-214AB(SMC)}
! ^{Case Material: Molded Plastic. UL Flammability}
Classification Rating 94V-0
! Terminals: Lead Free Plating (Matte Tin Finish).
Solderable per MIL-STD-202, Method 208
! Marking: Date Code and Marking Code
See Page 2
! Weight: 0.21 grams (approximate)
SMC/DO-214AB
B
Dim Min Max
A
5.59 6.22
A
C
B
6.60 7.11
C
2.75 3.18
D
0.15 0.31
D
E
7.75 8.13
G
0.10 0.20
J
H
0.76 1.52
H
G
E
J
2.00 2.62
All Dimensions in mm
Maximum Ratings and Electrical Characteristics ^TA ^{= 25°C unless otherwise specified}
Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%.
Characteristic
Symbol
Value
Peak Pulse Power Dissipation 10/1000µS Waveform (Note 1, 2) Figure 3
Peak Pulse Current on 10/1000µS Waveform (Note 1) Figure 4
Peak Forward Surge Current 8.3ms Single Half Sine-Wave
Superimposed on Rated Load (JEDEC Method) (Note 2, 3)
Operating and Storage Temperature Range
PPPM
IPPM
IFSM
Tj, TSTG
3000
See Table 1
100
-55 to +150
Note: 1. Non-repetitive current pulse, per Figure 4 and derated above T_A = 25°C per Figure 1.
2. Mounted on 8.0mm² copper pads to each terminal.
3. Measured on 8.3ms single half sine-wave or equivalent square wave, duty cycle = 4 pulses per minutes maximum.
Unit
W
A
A
°C
1 of 2
www.sunmate.tw