RS1001 Datasheet, PDF (1/2 Pages) Micro Commercial Components – 10 Amp Single Phase Bridge Rectifier 50 to 1000 Volts

RS1001-RS1007
SINGLE-PHASE BRIDGE RECTIFIER
VOLTAGE RANGE: 50 - 1000V
CURRENT: 10 A
Features
l Low cost
l High forward surge current capability
l Ideal for printed circuit board
0
Mechanical Data
l Case: Transfer molded plastic
l Terminal: Lead solderable per MIL-STD-202E method 208C
l Polarity: Polarity symbols marked on case
l Mounting: Thru hole for #6 screw, 5 in.-lbs terque max
l Weight: 0.27 ounce, 7.59 gram
Maximum Ratings and Electrical Characteristics T_A = 25°C unless otherwise specified
Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%.
Characteristic
Symbol _{RS1001 RS1002 RS1003 RS1004 RS1005 RS1006 RS1007}
Maximum Repetitive Peak Reverse Voltage VRRM
50
100
200
400
600
800 1000
Unit
Volts
Maximum RMS Voltage
VRMS
35
70
140
280
420
560
700
Volts
Maximum DC Blocking Voltage
VDC
Maximum Average Forward ^{TC=50 (Note 2)}
Rectified Output Current, at
TC=100 (Note 2)
TA=45 (Note 3)
I(AV)
Peak Forward Surge Current 8.3ms single half sine-wave
superimposed on rated load (JEDEC Method)
IFSM
Rating for Fusing (t<8.3ms)
I²t
Maximum Instantaneous Forward Voltage Drop per
bridge element at 10.0A
VF
Maximum DC Reverse Current at rated TA=25
DC blocking voltage per element
TA=100
IR
Typical Junction Capacitance (Note 1)
CJ
50
100
200
400
600
800 1000 Volts
10.0
8.0
Amps
6.0
350
Amps
373
A ²s
1.0
Volts
5.0
µAmps
1.0
mAmps
200
pF
Typical Thermal Resistance (Note 2)
RθJC
5.0
/W
Operating and Storage Temperature Range T_J, T_STG
-55 to +150
NOTES:
1. Measured at 1.0 MHz and applied reverse voltage of 4.0 Volts.
2. Unit mounted on 6.0 x5.5 x0.24 thick (15x14x0.6cm) Al. plate.
3. Unit mounted in free air, no heatsink, P.C.B at 0.375 (9.5mm) lead length with 0.5 x0.5 (12x12cm) copper pads
1 of 2
www.sunmate.tw