English
Language : 

MBR0540T1 Datasheet, PDF (1/3 Pages) Motorola, Inc – SCHOTTKY BARRIER RECTIFIER 0.5 AMPERES 40 VOLTS
MBR0540T1/MBR0540T3
0.5A Surface Mount Schottky Power Rectifier
Features
· Guardring for Stress Protection
· Very Low Forward Voltage
· Epoxy Meets UL 94 V−0 @ 0.125 in
· Package Designed for Optimal Automated Board Assembly
· Pb−Free Packages are Available
Mechanical Data
· Reel Options: 3,000 per 7 inch reel/8 mm tape
· Reel Options: 10,000 per 13 inch reel/8 mm tape
· Device Marking: B4
· Polarity Designator: Cathode Band
· Weight: 11.7 mg (approximately)
· Case: Epoxy Molded
· Finish: All External Surfaces Corrosion Resistant and Terminal
Leads are Readily Solderable
· Lead and Mounting Surface Temperature for Soldering Purposes:
260°C max. for 10 Seconds
C
H
B
A
M
K
L
SOD-123
Dim Min Max
A
0.55 Typ
B 1.40 1.70
C 3.55 3.85
H 2.55 2.85
J 0.00 0.10
K 1.00 1.35
L 0.25 0.40
M 0.10 0.15
α
0
8°
All Dimensions in mm
Maximum Ratings and Electrical Characteristics @ TA = 25°C unless otherwise specified
Rating
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage
Average Rectified Forward Current
(At Rated VR, TC = 115°C)
Peak Repetitive Forward Current
(At Rated VR, Square Wave, 20 kHz, TC = 115°C)
Non−Repetitive Peak Surge Current
(Surge Applied at Rated Load Conditions Halfwave,
Single Phase, 60 Hz)
Storage/Operating Case Temperature Range
Operating Junction Temperature
Voltage Rate of Change
(Rated VR, TJ = 25°C)
Maximum Instantaneous Forward Voltage (Note 3)
(iF = 0.5 A)
(iF = 1 A)
Maximum Instantaneous Reverse Current (Note 3)
(VR = 40 V)
(VR = 20 V)
1. Mounted with minimum recommended pad size, PC Board FR4.
2. 1 inch square pad size (1 X 0.5 inch for each lead) on FR4 board.
3. Pulse Test: Pulse Width ≤ 250 ms, Duty Cycle ≤ 2.0%.
Symbol
VRRM
VRWM
VR
IO
IFRM
IFSM
Tstg, TC
TJ
dv/dt
vF
IR
Value
Unit
40
V
0.5
A
1.0
A
5.5
A
−55 to +150
°C
−55 to +150
°C
1000
V/ms
TJ = 25°C TJ = 100°C
V
0.51
0.46
0.62
0.61
TJ = 25°C TJ = 100°C
mA
20
13,000
10
5,000
1 of 3