LB2S Datasheet, PDF (1/2 Pages) GOOD-ARK Electronics – Low Profile Miniature Glass Passivated Single-Phase Surface Mount Bridge Rectifier

LB2S-LB10S
SINGLE-PHASE SURFACE MOUNT BRIDGE RECTIFIER
VOLTAGE RANGE: 200 - 1000V
CURRENT: 1.0 A
Features
D Low Profile: Typical height of 1.4mm
D Ideal for automated placement
D High surge current capability
Mechanical Data
D Case:SOPA-4
D Epoxy meets UL-94V-0 Flammability rating
D Terminals:Matte tin plated ldads, solderable per
D J-STD-002B and JESD22-B102D
D Polarity:As markde on body
SOPA-4

Maximum Ratings and Electrical Characteristics TA = 25°C unless otherwise specified
Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%.
Characteristic
Symbol
Maximum repetitive peak reverse voltage
Maximum RMS voltage
Maximum DC blocking voltage
Maximum Average forward output rectified current
VRRM
VRMS
VDC
on glass-eposy P.C.B
IF(AV)
on aluminum substrate
LB2S
200
140
200
LB4S
400
280
400
LB6S
600
420
600
1.0
0.8
LB8S
800
560
800
Peak forward surge current 8.3 ms single sine-wave
superimposed on rated load (JEDEC Method)
IFSM
30
Rating for fusig (t\<8.3ms)
I2t
3
Maximum instantaneous forward voltage drop
per diode at 0.4A
VF
0.95
Maximum DC reverse current atTA=25Â¥ _IR
rated DC blocking voltage per legTA=125Â¥
R_θJA
Typical thermal resistance per leg (Note 1)
R_θJL
Operating junction temperature range TJ
Storage temperature range
T_STG
Notes1: . Device mounted P.C.B with 0.47x0.47''(12mmx12mm) Copper Pads.
2. JEDEC registered values
5
500
80
25
-55 to +150
-55 to +150
LB10S
1000
800
1000
Unit
V
V
V
A
A
A2sec
V
µA
Â¥/W
Â¥
Â¥
1 of 2
www.sunmate.tw