KBPC35005W Datasheet, PDF (1/2 Pages) Galaxy Semi-Conductor Holdings Limited – SILICON BRIDGE RECTIFIERS

KBPC35005W-KBPC3510W
SINGLE PHASE SILICON BRIDGE RECTIFIER
VOLTAGE RANGE: 50 - 1000V
CURRENT: 35 A
Features
! Glass Passivated Die Construction
! Low Reverse Leakage Current
! _{Low Power Loss, High Efficiency}
! Electrically Isolated Epoxy Case for
! Maximum Heat Dissipation
Mechanical Data
! Case: Epoxy Case with Heat Sink Internally
Mounted in the Bridge Encapsulation
! Terminals: Plated Leads Solderable per
MIL-STD-202, Method 208
! Polarity: Symbols Marked on Case
! Mounting: Through Hole for #10 Screw
! Marking: Type Number
KBPC-25W
0.452 _MAX.
(11.5)
0.042(1.10) DIA.
0.038(0.97)
0.591 _MAX.
(15.0)
0.732(18.6)
0.692(17.6)
1.181(30.0)
1.102(28.0)
0.673(17.1)
0.633(16.1)
AC
+
-
AC
HOLE FOR
NO.8 SCREW
1.181(30.0)
1.102(28.0)
0.468(11.9)
0.429(10.9)
0.732(18.6)
0.692(17.6)
0.033x.250
(0.8x6.4)
Dimensions in inches and (millimeters)
Maximum Ratings and Electrical Characteristics _{TA = 25°C unless otherwise specified}
Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%.
Characteristic
Maximum repetitive peak reverse voltage
Maximum RMS voltage
Maximum DC blocking voltage
Maximum average forward output rectified
current at TC=50 C (Note 1,2)
Peak forward surge current
8.3ms single half sine-wave superimposed on
rated load (JEDEC Method)
Rating for Fusing(t<8.3ms)
Maximum instantaneous forward voltage dorp
per bridge element at 17.5A
Maximum DC reverse current TA=25 C
at rated DC blocking voltage TA=100 C
Isolation voltage from case to leads
Typical Thermal Resistance (Note 2)
Operating junction temperature range
storage temperature range
Symbol
KBPC
35005W
KBPC KBPC
3501W 3502W
KBPC KBPC KBPC _KBPC
3504W 3506W 3508W 3510W
Unit
VRRM
50
100 200 400 600 800 1000 ^V
VRMS
35
70 140 280 420 560 700 V
VDC
50
100 200 400 600 800 1000 V
I(AV)
35
A
IFSM
I²t
VF
IR
VISO
RθJA
TJ
TSTG
400.0
664
1.1
10
1.0
2500
2.0
-65 to +150
-65 to +150
A
A²s
V
µA
mA
VAC
C/W
C
C
NOTES:
1.Unit mounted on 9” x 3.5” x4.6” thick(23cmx9cmx11.8cmcm)Al.plate.
2.Bolt dowm on heat-sink with silicone thermal compound between bridge and mounting surface for
maximum heat transfer efficiency with #8 screw.
1 of 2
www.sunmate.tw