KBPC35005 Datasheet, PDF (1/2 Pages) Wing Shing Computer Components – SINGLE-PHASE SILICON BRIDGE RECTIFIER(VOLTAGE RANGE - 50 to 1000 Volts CURRENT - 35 Amperes)

KBPC35005-KBPC3510
SINGLE PHASE SILICON BRIDGE RECTIFIER
VOLTAGE RANGE: 50 - 1000V
CURRENT: 35 A
Features
! Glass Passivated Die Construction
! Low Reverse Leakage Current
! _{Low Power Loss, High Efficiency}
! Electrically Isolated Epoxy Case for
! Maximum Heat Dissipation
Mechanical Data
! Case: Epoxy Case with Heat Sink Internally
Mounted in the Bridge Encapsulation
! Terminals: Plated Leads Solderable per
MIL-STD-202, Method 208
! Polarity: Symbols Marked on Case
! Mounting: Through Hole for #10 Screw
! Marking: Type Number
KBPC-35
1.181(30.0)
1.102(28.0)
0.673(17.1)
0.633(16.1)
.452 _MAX.
(11.5)
0.480(12.2)
0.425(10.8)
HOLE FOR
NO.8 SCREW
0.732(18.6)
0.692(17.6)
AC
+
-
AC
1.181(30.0)
1.102(28.0)
0.673(17.1)
0.633(16.1)
0.582(14.8)
0.543(13.8)
0.033x0.250
(0.8x6.4)
Dimensions in inches and (millimeters)
Maximum Ratings and Electrical Characteristics T_A = 25°C unless otherwise specified
Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%.
Number
Maximum repetitive peak reverse voltage
Maximum RMS voltage
Maximum DC blocking voltage
Maximum average forward output rectified
current at TC=50 C (Note 1,2)
Peak forward surge current
8.3ms single half sine-wave superimposed on
rated load (JEDEC Method)
Rating for Fusing(t<8.3ms)
Maximum instantaneous forward voltage dorp
per bridge element at 17.5A
Maximum DC reverse current TA=25 C
at rated DC blocking voltage TA=100 C
Isolation voltage from case to leads
Typical Thermal Resistance (Note 2)
Operating junction temperature range
storage temperature range
SYMBOLS
VRRM
VRMS
VDC
KBPC
35005
50
35
50
KBPC
3501
100
70
100
KBPC
3502
200
140
200
KBPC
3504
400
280
400
KBPC
3506
600
420
600
KBPC
3508
800
560
800
KBPC
3510
UNITS
1000 ^VOLTS
700 ^VOLTS
1000 ^VOLTS
I(AV)
35
Amps
IFSM
I²t
VF
IR
VISO
RθJA
TJ
TSTG
400.0
664
1.1
10
1.0
2500
2.0
-65 to +150
-65 to +150
Amps
A²s
Volts
µA
mA
VAC
C/W
C
C
NOTES:
1.Unit mounted on 9” x 3.5” x4.6” thick(23cmx9cmx11.8cmcm)Al.plate.
2.Bolt dowm on heat-sink with silicone thermal compound between bridge and mounting surface for
maximum heat transfer efficiency with #8 screw.
1 of 2
www.sunmate.tw