KBJ401 Datasheet, PDF (1/2 Pages) UNIOHM CORPORATION – SINGLE PHASE 4.0 AMP BRIDGE RECTIFIERS

KBJ401-KBJ407
SINGLE PHASE BRIDGE RECTIFIERS
VOLTAGE RANGE: 50 - 1000V
CURRENT: 4.0 A
Features
D Ideal for printed circuit board
D ^{Low forward voltage}
D Low leakage current
Mechanical Data
D Case: KBJ
D _{Mounting position: Any}
.995(25.3)
.983(24.7)
KBJ
.134(3.4)
.122(3.1)
.189(4.8)
.173(4.4)
.150(3.8)
.134(3.4)
.083(2.1)
.067(1.7)
.043(1.1)
.035(0.9)
~~
.114(2.9)
.098(2.5)
.031(0.8)
.023(0.6)
.303(7.7) .303(7.7) .303(7.7) _SPACING
.287(7.3) .287(7.3) .287(7.3)
Dimensions in inches and (millimeters)
Maximum Ratings and Electrical Characteristics T_A = 25°C unless otherwise specified
Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%.
Characteristic
KBJ401 KBJ402 KBJ403 KBJ404 KBJ405 KBJ406 KBJ407 ^Unit
Maximum Recurrent Peak Reverse Voltage
Maximum RMS Voltage
Maximum DC Blocking Voltage
50 100 200 400 600 800 1000 V
35 70 140 280 420 560 700 V
50 100 200 400 600 800 1000 V
Maximum Average Forward (with heatsink Note 1)
Rectified Current at Tc=100 C (Without heatsink)
4.0
A
2.4
Peak Forward Surge Current, 8.3 ms single half sine-wave
superimposed on rated load (JEDEC method)
120
A
Maximum Forward Voltage Drop per Bridge Element at 4.0A D.C.
1.1
V
Maximum DC Reverse Current
at Rated DC Blocking Voltage
Ta=25 C
Ta=100 C
5.0
A
500
A
Typical Thermal Resistance R JC (Note 2)
Typical Junction Capacitance (Note 3)
5.5
C/W
45
PF
Operating Temperature Range, TJ
-55 +150
C
Storage Temperature Range, TSTG
-55 +150
C
NOTES
1. Device mounted on 50mm x 50mm x 1.6mm Cu Plate Heatsink.
2. Thermal Resistance from Junction to Case with device mounted on 50mm x 50mm x 1.6mm Cu Plate Heatsink.
3. Measured at 1MHz and applied Reverse Voltage of 4.0V D.C.
1 of 2
www.sunmate.tw