GF1A Datasheet, PDF (1/2 Pages) General Semiconductor – SURFACE MOUNT GLASS PASSIVATED JUNCTION RECTIFIER

GF1A - GF1M
SURFACE MOUNT SILICON RECTIFIER DIODES
VOLTAGE RANGE: 50 - 1000V
CURRENT: 1.0 A
Features
! Plastic package has Underwriters Laboratory
Flammability Classification 94V-0
! Ideal for surface mount automotive applications
! _{High temperature metallurgically bonded construction}
! _{Glass passivated cavity-free junction}
! Capable of meeting environmental standards of
! _{High temperature soldering guaranteed: 450°C/5 seconds}
at terminals
! _{Complete device submersible temperature of 265°C for}
10 seconds in solder bath
Mechanical Data
! Case SMA(DO-214AC)Molded Plastic
! Polarity: lndicated by cathode band
! Weight: 0.002 ounces,0.053 grams
! _{Mounting position: Any}
B
A
J
H
G
E
SMA(DO-214AC)
Dim Min Max
C
A
2.29 2.92
B
4.00 4.60
C
1.27 1.63
D
D
0.15 0.31
E
4.80 5.59
G
0.10 0.20
H
0.76 1.52
J
2.01 2.62
All Dimensions in mm
Maximum Ratings and Electrical Characteristics T_A = 25°C unless otherwise specified
Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%.
Characteristic
Symbol _{GF1A GF1B GF1D GF1G GF1J GF1K GF1M Unit}
Maximum repetitive peak reverse voltage
VRRM
50
100
Maximum RMS voltage
Maximum DC blocking voltage
VRMS
VDC
35 70
50 100
Maximum average forward rectified current
at TL=125°C
I(AV)
Peak forward surge current
8.3ms single half sine-wave superimposed on
IFSM
rated load (JEDEC Method)
Maximum instantaneous forward voltage at 1.0A
VF
Maximum DC reverse current
at rated DC blocking voltage
TA=25°C
TA=125°C
IR
Typical reverse recovery time (NOTE 1)
Typical junction capacitance (NOTE 2)
Typical thermal resistance (NOTE 3)
Operating junction and storage temperature range
trr
CJ
RΘJA
RΘJL
TJ, TSTG
NOTES:
(1) Reverse recovery test conditions: IF=0.5A, IR=1.0A, Irr=0.25A
(2) Measured at 1.0 MHz and applied VR=4.0 Volts
(3) Thermal resistance from junction to ambient and from junction to lead
P.C.B. mounted on 0.2 x 0.2” (5.0 x 5.0mm) copper pad areas
1 of 2
200 400 600 800 1000 Volts
140 280 420 560 700 Volts
200 400 600 800 1000 Volts
1.0
Amp
30.0
1.10
5.0
50.0
2.0
15.0
80.0
26.0
-65 to +175
Amps
1.20
Volts
µA
µs
pF
°C/W
°C
www.sunmate.tw