FR6AB Datasheet, PDF (1/2 Pages) SUNMATE electronic Co., LTD – SURFACE MOUNT FAST RECOVER Y RECTIFIER DIODES

FR6AB - FR6MB
SURFACE MOUNT FAST RECOVERY RECTIFIER DIODES
VOLTAGE RANGE: 50 -1000 V
CURRENT: 6 .0 A
Features
! ^{Glass Passivated Die Construction}
! Fast Recovery Time for High Efficiency
! Low Forward Voltage Drop and High Current
Capability
! Ideally Suited for Automatic Assembly
! Plastic Material: UL Flammability
Classification Rating 94V-0
Mechanical Data
! ^{Case: SMC/DO-214AB, Molded Plastic}
! ^{Terminals: Solder Plated, Solderable}
per MIL-STD-750, Method 2026
! ^{Polarity: Cathode Band or Cathode Notch}
! ^{Marking: Type Number}
! ^{Weight: 0.21 grams (approx.)}
SMC/DO-214AB
B
Dim Min Max
A
5.59 6.22
A
C
B
6.60 7.11
C
2.75 3.18
D
0.15 0.31
D
E
7.75 8.13
G
0.10 0.20
J
H
0.76 1.52
H
G
E
J
2.00 2.62
All Dimensions in mm
Maximum Ratings and Electrical Characteristics @ TA = 25°C unless otherwise specified
Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%.
Characteristic
Symbol FR6 AB FR6 BB FR6 DB FR6 GB FR6 JB FR6 KB FR6 MB Unit
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage
V_RRM
V_RWM 50
V_R
RMS Reverse Voltage
V_R(RMS) 35
Average Rectified Output Current
@ TT = 75°C
I_O
Non-Repetitive Peak Forward Surge Current
8.3ms Single half sine-wave Superimposed on Rated Load IFSM
(JEDEC Method)
Forward Voltage
@ I _F = 6.0A _VFM
Peak Reverse Current
at Rated DC Blocking Voltage
@ T_A = 25°C
@ TA = 55°C
I_RM
Maximum Recovery Time (Note 3)
t_rr
Typical Junction Capacitance (Note 2)
C_j
Typical Thermal Resistance Junction to Terminal (Note 1) RqJT
Operating and Storage Temperature Range
T_j, T_STG
100 200 400 600 800 1000 V
70 140 280 420 560 700 V
6.0
A
300
A
1.3
10
50
150
250
150
12
-65 to +150
V
mA
500
ns
pF
K/W
°C
Notes:
1. Thermal resistance: junction to terminal, unit mounted on PC board with 5.0 mm² (0.013 mm thick) copper pad as heat sink.
2. Measured at 1.0MHz and applied reverse voltage of 4.0V DC.
3. Reverse recovery test conditions: I_F = 0.5A, I_R = 1.0A, I_rr = 0.25A. See figure 5.
1 of 2
www.sunmate.tw