FR5AF Datasheet, PDF (1/2 Pages) SUNMATE electronic Co., LTD – SURFACE MOUNT FAST RECOVER Y RECTIFIER DIODES

FR5AF - FR5MF
SURFACE MOUNT FAST RECOVERY RECTIFIER DIODES
VOLTAGE RANGE: 50-1000V
CURRENT: 5.0 A
Features
! Glass Passivated Die Construction
! ^{Fast Recovery Time for High Efficiency}
! ^{Low Forward Voltage Drop and High Current}
Capability
! Ideally Suited for Automatic Assembly
! Plastic Material: UL Flammability
Classification Rating 94V-0
Mechanical Data
! Case: SMBF, Molded Plastic
! Terminals: Solder Plated, Solderable
per MIL-STD-750, Method 2026
! Polarity: Cathode Band or Cathode Notch
! Marking: Type Number
! Weight: 0.0018 ounces,0.05grams
B
C
E
D
H
L
E
A
SMBF
Dim Min Max Typ
A 5.45 5.55 5.50
B 4.27 4.33 4.30
C 3.57 3.63 3.60
D 1.32 1.38 1.35
E 1.96 2.00 1.98
H 0.019 0.021 0.20
L 0.73 0.77 0.75
All Dimensions in mm
Maximum Ratings and Electrical Characteristics @ TA = 25°C unless otherwise specified
Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%.
Characteristic
Symbol FR5 AF FR5 BF FR5 DF FR5 GF FR5 JF FR5 KF FR5 MF _Unit
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage
V_RRM
VRWM
50
100
200 400
600 800
1000
V
V_R
RMS Reverse Voltage
VR(RMS)
35
70
1 40 280
420 560
700
V
Average Rectified Output Current
@ TT = 75°C
I_O
5.0
A
Non-Repetitive Peak Forward Surge Current
8.3ms Single half sine-wave Superimposed on Rated Load IFSM
150
A
(JEDEC Method)
Forward Voltage
@ I _F = 5.0A _VFM
1.3
V
Peak Reverse Current
at Rated DC Blocking Voltage
@ T_A = 25°C
@ TA = 125°C
I_RM
5.0
100
mA
Maximum Recovery Time (Note 3)
t_rr
150
250
500
ns
Typical Junction Capacitance (Note 2)
C_j
78
pF
Typical Thermal Resistance Junction to Terminal (Note 1) RqJT
50
K/W
Operating and Storage Temperature Range
Tj, TSTG
-65 to +150
°C
Notes:
1. Thermal resistance: junction to terminal, unit mounted on PC board with 5.0 mm² (0.013 mm thick) copper pad as heat sink.
2. Measured at 1.0MHz and applied reverse voltage of 4.0V DC.
3. Reverse recovery test conditions: I_F = 0.5A, I_R = 1.0A, I_rr = 0.25A. See figure 5.
1 of 2
www.sunmate.tw