FR3A Datasheet, PDF (1/2 Pages) Surge Components – FAST SWITCHING SURFACE MOUNT RECTIFIER VOLTAGE - 50 to 800 Volts CURRENT -3.0 Amperes

FR3A - FR3M
SURFACE MOUNT FAST RECOVERY RECTIFIER DIODES
VOLTAGE RANGE: 50-1000V
CURRENT: 3.0 A
Features
! Glass Passivated Die Construction
! ^{Fast Recovery Time for High Efficiency}
! ^{Low Forward Voltage Drop and High Current}
Capability
! Ideally Suited for Automatic Assembly
Plastic Material: UL Flammability
Classification Rating 94V-0
Mechanical Data
! Case: SMC/DO-214AB, Molded Plastic
! Terminals: Solder Plated, Solderable
per MIL-STD-750, Method 2026
! Polarity: Cathode Band or Cathode Notch
! Marking: Type Number
! Weight: 0.21 grams (approx.)
B
A
J
H
G
E
SMC/DO-214AB
Dim Min Max
A
5.59 6.22
C
B
6.60 7.11
C
2.75 3.18
D
0.15 0.31
D
E
7.75 8.13
G
0.10 0.20
H
0.76 1.52
J
2.00 2.62
All Dimensions in mm
Maximum Ratings and Electrical Characteristics T_A = 25°C unless otherwise specified
Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%.
Characteristic
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage
RMS Reverse Voltage
Symbol FR3A
V_RRM
VRWM
50
V_R
VR(RMS)
35
FR3B FR3D
100 200
70
140
FR3G FR3J
400 600
280 420
FR3K
800
560
FR3M Unit
1000 V
700 V
Average Rectified Output Current
@ T_T = 75°C
I_O
Non-Repetitive Peak Forward Surge Current
8.3ms Single half sine-wave Superimposed on Rated Load IFSM
(JEDEC Method)
Forward Voltage
Peak Reverse Current
at Rated DC Blocking Voltage
Maximum Recovery Time (Note 3)
Typical Junction Capacitance (Note 2)
@ I _F = 3.0A _VFM
@ T_A = 25°C
@ TA = 125°C
I_RM
t
rr
C_j
Typical Thermal Resistance Junction to Terminal (Note 1) RqJT
Operating and Storage Temperature Range
Tj, TSTG
3.0
100
1.3
5.0
250
150
250
50
25
-65 to +150
A
A
V
mA
500
ns
pF
K/W
°C
Notes:
1. Thermal resistance: junction to terminal, unit mounted on PC board with 5.0 mm² (0.013 mm thick) copper pad as heat sink.
2. Measured at 1.0MHz and applied reverse voltage of 4.0V DC.
3. Reverse recovery test conditions: I_F = 0.5A, I_R = 1.0A, I_rr = 0.25A. See figure 5.
1 of 2
www.sunmate.tw