FR10A Datasheet, PDF (1/2 Pages) Micro Commercial Components – 10 Amp Fast Recovery Rectifier 50 to 1000 Volts

FR10A - FR10M
SURFACE MOUNT FAST RECOVERY RECTIFIER DIODES
VOLTAGE RANGE: 50-1000 V
CURRENT: 10.0 A
Features
! ^{Glass Passivated Die Construction}
! ^{Fast Recovery Time for High Efficiency}
! ^{Low Forward Voltage Drop and High Current}
Capability
! Ideally Suited for Automatic Assembly
! Plastic Material: UL Flammability
Classification Rating 94V-0
Mechanical Data
! Case: SMC(DO-214AB),Molded Plastic
! _{Terminals: Solder Plated Terminal -}
Solderable per MIL-STD-202, Method 208
! Polarity: Cathode Band or Cathode Notch
! _{Marking: Type Number}
! Weight: 0.21 grams (approx.)
B
A
J
H
G
E
SMC/DO-214AB
Dim Min Max
A
5.59 6.22
C
B
6.60 7.11
C
2.75 3.18
D
0.15 0.31
D
E
7.75 8.13
G
0.10 0.20
H
0.76 1.52
J
2.00 2.62
All Dimensions in mm
Maximum Ratings and Electrical Characteristics @ TA = 25°C unless otherwise specified
Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%.
Characteristic
Symbol FR10A FR10B FR10D FR10G FR10J FR10K FR10M Unit
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage
V_RRM
V_RWM
50
V_R
RMS Reverse Voltage
V_R(RMS) 35
Average Rectified Output Current
@ TT = 55°C
I_O
Non-Repetitive Peak Forward Surge Current
8.3ms Single half sine-wave Superimposed on Rated Load IFSM
(JEDEC Method)
Forward Voltage
@ I _F = 10.0A _VFM
Peak Reverse Current
at Rated DC Blocking Voltage
@ T_A = 25°C
@ TA = 100°C
I_RM
Maximum Recovery Time (Note 3)
t_rr
Typical Junction Capacitance (Note 2)
C_j
Typical Thermal Resistance Junction to Terminal (Note 1) RqJT
Operating and Storage Temperature Range
T_j, T_STG
100 200 400 600
70 140 280 420
10.0
300
1.3
10
50
150
250
22
12
-65 to +150
800 1000 V
560 700 V
A
A
V
mA
500
ns
pF
K/W
°C
Notes:
1. Thermal resistance: junction to terminal, unit mounted on PC board with 5.0 mm² (0.013 mm thick) copper pad as heat sink.
2. Measured at 1.0MHz and applied reverse voltage of 4.0V DC.
3. Reverse recovery test conditions: I_F = 0.5A, I_R = 1.0A, I_rr = 0.25A. See figure 5.
1 of 2
www.sunmate.tw