D5SB20 Datasheet, PDF (1/2 Pages) Shindengen Electric Mfg.Co.Ltd – General Purpose Rectifiers(200V 6A)

D5SB10-D5SB100
SINGLE PHASE GLASSPASSIVATED SIP BRIDGE RECTIFIER
VOLTAGE RANGE: 100 - 1000V
CURRENT: 6 A
Features
! ^{Glass passivated chip junctions}
! Plastic Package has Underwriters
! ^{Laboratory Flammability Classification 94V-0}
! High current capacity with small package
! ^{Superior thermal conductivity}
Mechanical Data
! Terminal: Plated leads solderable per
MIL-STD 202E, method 208C
! ^{Case: UL-94 Class V-O recognized flame}
retardant epoxy
! Polarity: Polarity symbol marked on body
! ^{Mounting position: Any}
D5-SB
Dimensions in inches and (millimeters)
Maximum Ratings and Electrical Characteristics TA = 25°C unless otherwise specified
Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%.
Characteristic
Maximum repetitive voltage
Maximum DC reverse current at @TA=25°C
rated DC blocking voltage
@T_A=125°C
Average rectified forward
current 60Hz Sine wave
Resistance load
@T_C=100°C
@T_A=25°C
Symbol D5SB10 D5SB20 D5SB40 D5SB60
V _RM
100 200 400
600
I_R
10
500
6 ⁽¹⁾
I_O
2.8 ⁽²⁾
D5SB80
800
D5SB100
1000
Unit
V
A
A
Peak Forward Surge Current 10ms single half
sine-wave superimposed on rated load
I_FSM
150
A
Maximum Instantaneous
Forward Voltage @ 3.0A
V_F
1.1
V
Dielectric strength terminals to case,
AC 1 minute Current 1mA
Vdia
2.5
KV
Maximum thermal ^{on P.C.B without heat-sink}
Resistance per leg _{on AI plate heat-sink}
R _θJA
R _θJC
22 ⁽²⁾
3.4 ⁽¹⁾
Operating and Storage Temperature Range
T _J , T_STG
150 , -40 ~ 150
Mounting torque
Tor
Rating Torque：0.8N.m
： ^{Notes (1) Unit case mounted on AI plate heat-sink}
(2) Unites mounted on P.C.B. without heat-sink
(3) Recommended mounting position is to bolt down on heatsink with silicone thermal compound for maximum heat
transfer with #6 screw {heat-sink size： 10.5 * 8.2 * 0.3cm}
°C / W
°C
N.m
1 of 2
www.sunmate.tw