BZW06-5V8CA Datasheet, PDF (1/3 Pages) SUNMATE electronic Co., LTD – 600 Watts Axial Leaded Transient Voltage Suppressors

BZW06-5V8—BZW06-376
600 Watts Axial Leaded Transient Voltage Suppressors
Features
· Plastic package has Underwriters Laboratory
Flammability Classification 94V-0
· Glass passivated junction
A
· 600W peak pulse power capability with a 10/1000µs
waveform , repetition rate (duty cycle): 0.01%
· _{Excellent clamping capability}
· Fast response time: typically less than 1.0ps from 0 Volts to
V(BR) for uni-directional and 5.0ns for bi-directional types
· Devices with V(BR) 10V ID are typically ID less than 1.0 µA
B
A
C
D
· ^{High temperature soldering guaranteed:265 / 10 seconds,}
0.375"(9.5mm) lead length, 5Ibs. (2.3kg) tension
DO-15
Dim
Min
Max
A
25.40
¾
Mechanical Data
B
5.50
7.62
· Case:JEDEC DO--15, molded plastic body over
passivated junction
· Terminals: Axial leads, solderable per MIL-STD-750,
method 2026
· Polarity: Foruni-directional types the color band denotes
the cathode, which is postitive with respect to the
anode under normal TVS operation
· Weight: 0.014 ounces, 0.39 grams
· Mounting position: Any
C
0.686
0.889
D
2.60
3.60
All Dimensions in mm
Maximum Ratings and Electrical Characteristics ^{@ TA = 25°C unless otherwise specified}
SYMBOL
VALUE
UNIT
Peak pow er sissipation w ith a 10/1000µs w aveform (NOTE 1, FIG.1)
PPPM
Minimum 600
W
Peak pulse current w ith a 10/1000µs w aveform (NOTE 1)
IPPM
SEE TABLE 1
A
Steady state pow er dissipation at TL=75
fffffLead lengths 0.375"(9.5mm) (NOTE 2)
PM(AV)
3.0
W
Peak forw ard surge current, 8.3ms single half
ffffSine-w ave superimposed on rated load (JEDEC Method)
IFSM
100.0
A
Thermal resistance junction to lead
junction to ambient lead = 10mm
R_θJL
60
/W
R _θJA
100
Operating junction and storage temperature range
TJ, TSTG
-55---+175
NOTES: (1) Non-repetitive current pulse, per Fig. 3 and derated above T_A = 25°C per Fig. 2
Rating is 500W betw een 40V and 188V types. For a surge greater than the maximum values, the diode w ill short circuit.
(2) Mounted on copper pad area of 1.6 x 1.6” (40 x 40mm) per Fig. 5
1of3