BZW04P5V8 Datasheet, PDF (1/6 Pages) MDE Semiconductor, Inc. – GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR

BZW04 SERIES
400 Watts Axial Leaded Transient Voltage Suppressor
Features
· Plastic package has underwriters laboratory
flam mability classification 94V-0
· Glass passivated junction
· 400W peak pulse power capability with a 10/1000μs
A
B
A
waveform , repetition rate (duty cycle): 0.01%
· _{Excellent clam ping capability}
· _{Fast response tim e: typically less than 1.0ps from 0 Volts to}
V(BR) for uni-directional and 5.0ns for bi-directional types
C
D
· Devices with V(BR) 10V ID are typically ID less than 1.0 μA
· ^{High temperature soldering guaranteed:265 / 10 seconds,}
0.375"(9.5mm) lead length, 5lbs. (2.3kg) tension
DO-41
Dim
Min
Max
Mechanical Data
· _{Case:JEDEC DO--41, molded plastic body over}
passivated junction
· Term inals: axial leads, solderable per MIL-STD-750,
m ethod 2026
· _{Polarity: foruni-directional types the color band denotes}
the cathode, which is postitive with respect to the
anode under normal TVS operation
A
25.40
¾
B
4.06
5.21
C
0.71
0.864
D
2.00
2.72
All Dimensions in mm
· _{Weight: 0.012 ounces, 0.34 gram s}
· Mounting position: any
Maximum Ratings and Electrical Characteristics ^{@ TA = 25°C unless otherwise specified}
SYMBOL
VALUE
Peak pow er dissipation w ith a 10/1000μs w aveform (NOTE 1, FIG.1)
PPPM
Minimum 400
Peak pulse current w ith a 10/1000μs w aveform (NOTE 1)
IPPM
See table 1
Steady state pow er dissipation at TL=75
fffffLead lengths 0.375"(9.5mm) (NOTE 2)
PM(AV)
1.0
Peak forw ard surge current, 8.3ms single half
ffffSine-wave superimposed on rated load (JEDEC Method) (NOTE 3)
IFSM
40.0
Maximum instantaneous forw ard voltage at 25A for unidirectional only (NOTE 4)
VF
3.5/6.5
Operating junction and storage temperature range
TJ, TSTG
-50---+175
NOTES: (1) Non-repetitive current pules, per Fig. 3 and derated above TA=25 per Fig. 2
(2) Mounted on copper pad area of 1.6" x 1.6"(40 x40mm²) per Fig. 5
(3) Measured of 8.3ms single half sine-w ave or equare w ave, duty cycle=4 pulses per minute maximum
(4) VF=3.5 Volt max. for devices of V(BR) 220V, and VF=5.0 Volt max. for devices of V(BR) >220V
UNIT
W
A
W
A
V
1of6