5KP5.0CA Datasheet, PDF (1/4 Pages) SUNMATE electronic Co., LTD – 5000Watts Axial Leaded Transient Voltage Suppressors

Features
5KP5.0(C)A -5KP180(C)A
5000Watts Axial Leaded Transient
Voltage Suppressors
! 5000W Peak Pulse Power Dissipation
! _{5.0V – 1 8 0 V Standoff Voltage}
! Uni- and Bi-Directional Versions Available
! Excellent Clamping Capability
! Fast Response Time
! Plastic Case Material has UL Flammability
Classification Rating 94V-O
Mechanical Data
! Case: JEDEC R-6 Molded Plastic
! Terminals: Axial Leads, Solderable per
MIL-STD-750, Method 2026
! Polarity: Cathode Band or Cathode Notch
A
B
A
C
D
R-6
Dim
Min
Max
A
25.4
—
B
8.60
9.10
C
1.20
1.30
D
8.60
9.10
All Dimensions in mm
“C” Suffix Designates Bi-directional Devices
“A” Suffix Designates 5% Tolerance Devices
No Suffix Designates 10% Tolerance Devices
Maximum Ratings and Electrical Characteristics @T_A=25°C unless otherwise specified
Characteristic
Peak Pulse Power Dissipation at T_A = 25°C (Note 1, 2, 5) Figure 3
Peak Forward Surge Current (Note 3)
Peak Pulse Current on 10/1000µS Waveform (Note 1) Figure 1
Steady State Power Dissipation (Note 2, 4)
Operating and Storage Temperature Range
Symbol
PPPM
IFSM
IPPM
PM(AV)
Tj, TSTG
Value
Unit
5000 Minimum
W
400
A
See Table 1
A
8.0
W
-55 to +175
°C
Note: 1. Non-repetitive current pulse, per Figure 1 and derated above T_A = 25°C per Figure 4.
2. Mounted on 20mm² copper pad.
3. 8.3ms single half sine-wave duty cycle = 4 pulses per minutes maximum,
4. Lead temperature at 75°C = T_{L .}
5. Peak pulse power waveform is 10/1000µS.
1 of 4