20KPA20CA Datasheet, PDF (1/4 Pages) SUNMATE electronic Co., LTD – 20000 Watts Axial Leaded Transient Voltage Suppressor

20KPA SERIES
20000 Watts Axial Leaded Transient Voltage Suppressor
Features
· Plastic package has Underwriters Laboratory
Flammability Classification 94V-0
· _{Glass passivated junction}
· 20000W Peak Pulse Power
capability on 10/1000 µs waveform
· Excellent clamping capability
· Repetition rate (duty cycle):0.05%
· Low incremental surge resistance
· Fast response time: typically less
than 1.0 ps from 0 volts to BV
· Typical Id less than 1µA above 10V
· High temperature soldering guaranteed:
265°C/10 seconds/.375", (9.5mm) lead
length, 5lbs., (2.3kg) tension
Mechanical Data
· Case:Molded plastic over glass passivated junction
· Terminals: Plated Axial leads, solderable per
MIL-STD-750, Method 2026
· Polarity: Color band denoted positive end (cathode)
except Bipolar
· Mounting Position: Any
· Weight: 0.07 ounce, 2.1 gram
A
B
A
C
D
R-6
Dim
Min
Max
A
25.4
—
B
8.60
9.10
C
1.20
1.30
D
8.60
9.10
All Dimensions in mm
Maximum Ratings and Electrical Characteristics @ TA = 25°C unless otherwise specified
RATING
SYMBOL
VALUE
Peak Pulse Power Dissipation on 10/1000 µs
waveform (NOTE 1)
Pppm
Minimum 20000
Peak Pulse Current of on 10-1000 µs waveform
(NOTE 1)
Ippm
SEE TABLE 1
Steady State Power Dissipation at Tl=75 °C
Lead Lengths.375", (9.5mm)(NOTE 2)
Pm(AV)
8.0
Peak Forward Surge Current, 8.3ms Sine-Wave
Superimposed on Rated Load, (JEDEC Method)
IFSM
400.0
(NOTE 3)
Operatings and Storage Temperature Range
Tj, Tstg
-55 to +175
NOTES:
1.Non-repetitive current pulse, per Fig.3 and derated above Ta=25 °C per Fig.2.
2.Mounted on Copper Pad area of 0.8x0.8" (20x20mm) per Fig.5.
3.8.3ms single half sine-wave, or equivalent square wave, Duty cycle=4 pulses per minutes maximum
UNITS
Watts
Amps
Watts
Amps
°C
1of4