ZUR77W Datasheet, PDF (3/4 Pages) SunLED Corporation – 4.5x2mm SMD CHIP LED LAMP

www.SunLED.com
Part Number: ZUR77W
4.5x2mm SMD CHIP LED LAMP
™ Recommended Soldering Pattern
(Units : mm; Tolerance: ± 0.1)
™ The device has a single mounting surface. The device
must be mounted according to the specifications.
™ Tape Specification (Units : mm)
Remarks:
If special sorting is required (e.g. binning based on forward voltage, luminous intensity / luminous flux or wavelength),
the typical accuracy of the sorting process is as follows:
1. Wavelength: +/-1nm
2. Luminous Intensity / luminous flux: +/-15%
3. Forward Voltage: +/-0.1V
Note: Accuracy may depend on the sorting parameters.
Published Date : FEB 25, 2008
Drawing No : SDSA1281
V5
Checked : B.L.LIU
P.3/4