ZTHI55W-3 Datasheet, PDF (3/4 Pages) SunLED Corporation – 3.2x1.6mm INFRARED EMITTING DIODE

www.SunLED.com
Part Number: _ZTHI55W-3
3.2x1.6mm INFRARED EMITTING DIODE
™ Recommended Soldering Pattern
(Units : mm;Tolerance:± 0.1)
™ The device has a single mounting surface. The device
must be mounted according to the specifications.
™ Tape Specification (Units : mm)
Remarks:
If special sorting is required (e.g. binning based on forward voltage or radiant intensity / luminous flux),
the typical accuracy of the sorting process is as follows:
1. Radiant Intensity / Luminous Flux: +/-15%
2. Forward Voltage: +/-0.1V
Note: Accuracy may depend on the sorting parameters
Published Date : FEB 28,2008
Drawing No : SDSA3655
V4
Checked : B.L.LIU
P.3/4