ZMO53W-3 Datasheet, PDF (3/4 Pages) SunLED Corporation – 1.6X0.8mm SMD CHIP LED LAMP

www.SunLED.com
Part Number: _ZMO53W-3
1.6X0.8mm SMD CHIP LED LAMP
™ Recommended Soldering Pattern
(Units : mm; Tolerance: ±0.1)
™ The device has a single mounting surface. The device
must be mounted according to the specifications.
™ Tape Specification (Units : mm)
Remarks:
If special sorting is required (e.g. binning based on forward voltage, Luminous intensity / luminous flux, or wavelength),
the typical accuracy of the sorting process is as follows:
1. Wavelength: +/-1nm
2. Luminous Intensity / Luminous Flux: +/-15%
3. Forward Voltage: +/-0.1V
Note: Accuracy may depend on the sorting parameters.
Published Date : FEB 28,2008
Drawing No : SDSA4433
V3
Checked : B.L.LIU
P.3/4