English
Language : 

XSM2DG983W Datasheet, PDF (1/3 Pages) SunLED Corporation – Low power consumption and thermal resistance
Part Number: XSM2DG983W
SUPER FLUX LED LAMP
Features
● High current operation for greater luminous output
● Low power consumption and thermal resistance
● Can be used with automatic insertion equipment
● RoHS Compliant
Package Schematics
Benefits:
●Rugged design allows for easy maintenance
●Robust package for optimum reliability
Typical Applications:
●Automotive side markers
●Gaming and entertainment lighting
●Signs and road hazard indicators
ATTENTION
OBSERVE PRECAUTIONS
FOR HANDLING
ELECTROSTATIC
DISCHARGE
SENSITIVE
DEVICES
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.25(0.01") unless otherwise noted.
3. Specifications are subject to change without notice.
Absolute Maximum Ratings
(TA=25°C)
Reverse Voltage
VR
Green
(InGaN)
5
Unit
V
DC Forward Current
IF
30
mA
Power Dissipation
PD
123
mW
Operating Temperature
TA
-40 ~ +85
°C
Storage Temperature
Tstg -55 ~ +85
Electrostatic Discharge Threshold
(HBM)
450
V
Lead Solder Temperature
[1.5mm Below Seating Plane.][1]
260°C For 5 Seconds
Operating Characteristics
(TA=25°C)
Forward Voltage (Typ.) (IF=30mA)
Forward Voltage (Max.) (IF=30mA)
Reverse Current (Max.) (VR=5V)
Wavelength of Peak Emission
CIE127-2007*(Typ.)
(IF=30mA)
Wavelength of Dominant Emission
CIE127-2007*(Typ.)
(IF=30mA)
Spectral Line Full Width At Half
Maximum (Typ.) (IF=30mA)
Capacitance (Typ.) (VF=0V, f=1MHz)
Thermal Resistance (Typ.)
Green
(InGaN)
Unit
VF
3.3
V
VF
4.1
V
IR
50
uA
λP
520*
nm
λD
△λ
C
Rθj-pin
525*
35
100
150
nm
nm
pF
°C/W
1.No Reflow soldering .
2.A Relative Humidity between 40% and 60% is recommended in
ESD-protected work areas to reduce static build up during assembly
process (Reference JEDEC/JESD625-A and JEDEC/J-STD-033)
Part
Number
Emitting
Color
Emitting
Material
Lens-color
Luminous Intensity Luminous Flux Wavelength Viewing
CIE127-2007* CIE127-2007* CIE127-2007* Angle
(IF=30mA) cd
(IF=30mA) lm
λP nm
2θ 1/2
min.
typ.
XSM2DG983W
Green
InGaN
Water Clear 3.6*
5.99*
1.Luminous intensity is measured with an integrating sphere after the device has stabilized.
2.θ 1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value.
3.LEDs are binned according to their Luminous intensity.
* Luminous intensity / luminous flux value and wavelength are in accordance with CIE127-2007 standards.
Oct 10,2016
typ.
6.3*
520*
40°
XDSB7672 V2-Z Layout: Maggie L.
P. 1/3