XSM2CYK983W Datasheet, PDF (1/3 Pages) SunLED Corporation – Can be used with automatic insertion equipment

Part Number: XSM2CYK983W
SUPER FLUX LED LAMP
Features
● High current operation for greater luminous output
● Low power consumption and thermal resistance
● Can be used with automatic insertion equipment
● RoHS Compliant
Package Schematics
Benefits:
●Rugged design allows for easy maintenance
●Robust package for optimum reliability
Typical Applications:
●Automotive side markers
●Gaming and entertainment lighting
●Signs and road hazard indicators
ATTENTION
OBSERVE PRECAUTIONS
FOR HANDLING
ELECTROSTATIC
DISCHARGE
SENSITIVE
DEVICES
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.25(0.01") unless otherwise noted.
3. Specifications are subject to change without notice.
Absolute Maximum Ratings
(TA=25°C)
Yellow
(AlGaInP)
Unit
Operating Characteristics
(TA=25°C)
Reverse Voltage
DC Forward Current
VR
5
Forward Voltage (Min.) (IF=70mA)
V
Forward Voltage (Typ.) (IF=70mA)
IF
70
mA
Forward Voltage (Max.) (IF=70mA)
Power Dissipation
Operating Temperature
Storage Temperature
PD
210
mW
TA
-40 ~ +85
°C
Tstg -55 ~ +85
Reverse Current (Max.) (VR=5V)
Wavelength of Peak Emission
CIE127-2007*(Typ.) (IF=70mA)
Wavelength of Dominant Emission
CIE127-2007*(Typ.) (IF=70mA)
Lead Solder Temperature
[1.5mm Below Seating Plane.][1]
260°C For 5 Seconds
Spectral Line Full Width At Half
Maximum (Typ.) (IF=70mA)
Capacitance (Typ.) (VF=0V, f=1MHz)
1.No Reflow soldering .
2.A Relative Humidity between 40% and 60% is recommended in
Thermal Resistance (Typ.)
ESD-protected work areas to reduce static build up during assembly
process (Reference JEDEC/JESD625-A and JEDEC/J-STD-033)
Yellow
(AlGaInP)
Unit
VF
2.2
V
VF
2.4
V
VF
3.0
V
IR
10
uA
λP
590*
nm
λD
590*
nm
△λ
20
nm
C
45
pF
Rθj-pin
125
°C/W
Part
Number
Emitting
Color
Emitting
Material
Lens-color
Luminous Intensity Luminous Flux Wavelength
CIE127-2007* CIE127-2007* CIE127-2007*
(IF=70mA) cd
(IF=70mA) lm
λP nm
Viewing
Angle
2θ 1/2
min.
typ.
XSM2CYK983W
Yellow
AlGaInP Water Clear 3.1*
4.99*
1.Luminous intensity is measured with an integrating sphere after the device has stabilized.
2.θ 1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value.
3.LEDs are binned according to their Luminous intensity.
* Luminous intensity / luminous flux value and wavelength are in accordance with CIE127-2007 standards.
Oct 10,2016
typ.
5.3*
590*
70°
XDSB7181 V3-Z Layout: Maggie L.
P. 1/3