LME11W Datasheet, PDF (1/4 Pages) SunLED Corporation – T-1 (3mm) SOLID STATE LAMP

www.SunLED.com
Part Number: _LME11W
T-1 (3mm) SOLID STATE LAMP
Features
●LOW POWER CONSUMPTION.
●POPULAR T-1 DIAMETER PACKAGE.
●GENERAL PURPOSE LEADS.
●RELIABLE AND RUGGED.
●LONG LIFE - SOLID STATE RELIABILITY.
●AVAILABLE ON TAPE AND REEL.
●RoHS COMPLIANT.
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ± 0.25(0.01") unless otherwise noted.
3.Specifications are subject to change without notice.
Absolute Maximum Ratings
(TA=25°C)
ME
(InGaAlP)
Unit
Reverse Voltage
Forward Current
VR
5
V
IF
30
mA
Forward Current (Peak)
1/10 Duty Cycle
0.1ms Pulse Width
iFS
195
mA
Power Dissipation
PT
75
mW
Operating Temperature
Storage Temperature
Lead Solder Temperature
[2mm Below Package Base]
Lead Solder Temperature
[5mm Below Package Base]
TA
-40 ~ +85
°C
Tstg -40 ~ +85
260°C For 3 Seconds
260°C For 5 Seconds
Operating Characteristics
(TA=25°C)
Forward Voltage (Typ.)
(IF=20mA)
VF
Forward Voltage (Max.)
(IF=20mA)
VF
Reverse Current (Max.)
(VR=5V)
IR
Wavelength of Peak
Emission (Typ.)
λP
(IF=20mA)
Wavelength of Dominant
Emission (Typ.)
λD
(IF=20mA)
Spectral Line Full Width
At Half-Maximum (Typ.)
Δλ
(IF=20mA)
Capacitance (Typ.)
(VF=0V, f=1MHz)
C
ME
(InGaAlP)
Unit
2.0
V
2.5
V
10
uA
630
nm
621
nm
20
nm
25
pF
Part
Number
LME11W
Emitting
Color
Emitting
Material
Red
InGaAlP
Lens-color
Water Clear
Luminous
Intensity
(IF=20mA)
mcd
min.
typ.
900
1990
Wavelength
nm
λP
Viewing
Angle
2 θ 1/2
630
34 °
Published Date : MAR 25,2008
Drawing No : SDSA3519
V3
Checked : B.L.LIU
P.1/4