LBBA11W Datasheet, PDF (1/4 Pages) SunLED Corporation – T-1 (3mm) SOLID STATE LAMP

www.SunLED.com
PRELIMINARY SPEC
Features
●LOW POWER CONSUMPTION.
●POPULAR T-1 DIAMETER PACKAGE.
●GENERAL PURPOSE LEADS.
●RELIABLE AND RUGGED.
●LONG LIFE - SOLID STATE RELIABILITY.
●AVAILABLE ON TAPE AND REEL.
●RoHS COMPLIANT.
Part Number: LBBA11W
T-1 (3mm) SOLID STATE LAMP
ATTENTION
OBSERVE PRECAUTIONS
FOR HANDLING
ELECTROSTATIC
DISCHARGE
SENSITIVE
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ± 0.25(0.01") unless otherwise noted.
3.Specifications are subject to change without notice.
Absolute Maximum Ratings
(TA=25°C)
BBA
(InGaN)
Unit
Reverse Voltage
VR
5
V
Forward Current
IF
30
mA
Forward Current (Peak)
1/10 Duty Cycle
iFS
0.1ms Pulse Width
100
mA
Power Dissipation
PT
120
mW
Operating Temperature
TA
-40 ~ +85
°C
Storage Temperature
Tstg
-40 ~ +85
Electrostatic Discharge Threshold
(HBM)
1000
V
Lead Solder Temperature
[2mm Below Package Base]
260°C For 3 Seconds
Lead Solder Temperature
[5mm Below Package Base]
260°C For 5 Seconds
Part
Number
Emitting
Color
Emitting
Material
Lens-color
LBBA11W
Blue
InGaN
Water Clear
Operating Characteristics
(TA=25°C)
BBA
(InGaN)
Unit
Forward Voltage (Typ.)
(IF=20mA)
VF
3.2
V
Forward Voltage (Max.)
(IF=20mA)
VF
4.0
V
Reverse Current (Max.)
(VR=5V)
IR
10
uA
Wavelength Of Peak
Emission (Typ.)
(IF=20mA)
λP
468
nm
Wavelength Of Dominant
Emission (Typ.)
λD
470
nm
(IF=20mA)
Spectral Line Full Width
At Half-Maximum (Typ.)
Δλ
21
nm
(IF=20mA)
Capacitance (Typ.)
(VF=0V, f=1MHz)
C
100
pF
Luminous
Intensity
(IF=20mA)
mcd
Wavelength
nm
λP
Viewing
Angle
2 θ 1/2
min.
typ.
280
995
468
20°
Published Date : MAR 26, 2008
Drawing No : SDSA4790
V6
Checked : B.L.LIU
P.1/4