SMM465 Datasheet, PDF (21/30 Pages) Summit Microelectronics, Inc. – 4-Channel Active DC Output Controller, Monitor, Marginer and Sequencer

DEVELOPMENT HARDWARE & SOFTWARE
The end user can obtain the Summit SMX3200
programming system for device prototype
development. The SMX3200 system consists of a
programming Dongle, cable and Windows^TM GUI
software. It can be ordered on the website or from a
local representative. The latest revisions of all
software and an application brief describing the
SMX3200 is available from the website
(www.summitmicro.com).
The SMX3200 programming Dongle/cable interfaces
directly between a PC’s parallel port and the target
application. The device is then configured on-screen
via an intuitive graphical user interface employing
drop-down menus.
SMM465
Preliminary Information
The Windows GUI software will generate the data and
send it in I²C serial bus format so that it can be directly
downloaded to the SMM465 via the programming
Dongle and cable. An example of the connection
interface is shown in Figure 15.
When design prototyping is complete, the software
can generate a HEX data file that should be
transmitted to Summit for approval. Summit will then
assign a unique customer ID to the HEX code and
program production devices before the final electrical
test operations. This will ensure proper device
operation in the end application.
VDD_CAP
D1
1N4148
Top view of straight 0.1" x 0.1 closed-side
connector. SMX3200 interface cable connector.
Pin 10, Reserved
Pin 8, Reserved
Pin 6, MR#
Pin 4, SDA
Pin 2, SCL
Pin 9, 5V
Pin 7, 10V
Pin 5, Reserved
Pin 3, GND
Pin 1, GND
SMM465
MR
SDA
SCL
GND
10 9
87
65
43
21
0.1 F
Figure 15 – SMX3200 Programmer I²C serial bus connections to program the SMM465. Note that the MR pin
does not need to be connected to pin 6 for programming purposes.
Summit Microelectronics, Inc
2085 1.1 05/27/04
21