SMB206A Datasheet, PDF (1/27 Pages) Summit Microelectronics, Inc. – Dual Programmable Buck Regulators with Integrated MOSFETs and Digital Control

SMB206A/7A/8A
Preliminary ¹ (See Last Page)
Dual Programmable Buck Regulators with Integrated MOSFETs and Digital
Control
FEATURES & APPLICATIONS
INTRODUCTION
FEATURES
• Dual Step-Down DC-DC Outputs
- Integrated power MOSFET switches
- 1A-3A output current with built in current limit
- Input voltage range: +4.5V to +16V
- Output voltage +0.8V to +5.0V (+/-2.5% accuracy)
- Automatic PFM mode for light load efficiency
- Integrated frequency compensation
• Integrated Power Control and Programmability
- I²C Digital or Pin Control (Enable)
- Static and Dynamic Programmable Output Voltage
• 128 levels of output voltage settings
• “Coarse” nominal setpoint
 0.8V-1.8V and 2.3/2.5/3.0/3.3/5.0V
• “Fine” Margining
 +1.14% to +7.95% (vs. coarse
setting)
- PWM frequency 500-1000kHz with 180^o interleave
- Output enable and power up/down sequence
- Programmable output softstart/stop
- Output UV monitoring with PGOOD/RESET output
APPLICATIONS
• Digital LCD/Plasma TV
• Digital Set-Top Box/PVR/DVR
• Datacom/Telecom Equipment
The SMB206A/7A/8A are highly integrated and flexible dual-
output DC-DC regulators designed for use in a wide variety of
applications. High integration reduces system cost and
component count, while the built-in non-volatile digital
programmability cuts development time by allowing system
designers to custom tailor the device to suit almost any
application.
The SMB206A/7A/8A includes integrated high-side MOSFET
switches for up to 1A-3A continuous output current.
Programmable output voltages as low as +0.8V support the
latest VLSI digital cores. Minimum external components result
in a very compact solution size for space constrained
applications.
Sophisticated power control/monitoring functions required by
many systems are built-in and accessible via digital I²C
interface. These include digitally programmable output voltage
setpoint, power-up/down softstart and sequencing,
independent enable/disable, output UV monitoring with
PowerGood/Reset output. Additionally, fine resolution voltage
margining is provided to allow for sophisticated system
optimization.
The integration of features and built-in flexibility of the
SMB206A/7A/8A allow the system designer to create a
“platform solution” that can be easily modified without
hardware changes. The SMB206A/7A/8A are well suited to
applications with an input range of +4.5V to +16V. The
operating temperature range is -40^oC to +85^oC and the
available packages are 3mm X 3mm 20-pad QFN or 6.5mm X
6.4mm TSSOP-24.
Figure 1 - SIMPLIFIED APPLICATION
+4.5V to +16V
DC IN
I2C I/F
Enable Inputs
PGOOD/RESET Output
SMB206A/7A/8A
System
Control
and
Monitoring
Step-Down 0
int. FET
Step-Down 1
int. FET
SMB206A - 3A+3A
SMB207A - 1A+1A
SMB208A - 2A+2A
0.8V-VIN (Prog.)
up to 1A-3A
CPU/SoC
0.8V-VIN (Prog.)
up to 1A-3A
Memory
SUMMIT Microelectronics, Inc. 2012 • 757 N. Mary Ave • Sunnyvale CA 94085 • Phone [phone] • FAX [phone]
http://www.summitmicro.com/
2147 2.4 2/23/2012
1