SMB113A Datasheet, PDF (1/32 Pages) Summit Microelectronics, Inc. – High-power, Four-channel Programmable DC-DC System Power Managers

SMB113A/B/SMB117/A
Preliminary Information
High-power, Four-channel Programmable DC-DC System Power Managers
FEATURES & APPLICATIONS
• Digital programming of all major parameters via
I²C interface and non-volatile memory
• Output voltage set point
• Input/battery voltage monitoring
• Output power-up/down sequencing
• Digital soft-start and output slew rate
• Dynamic voltage control of all outputs
• UV/OV monitoring of all outputs
• Enable/Disable outputs independently
• User friendly Graphical User Interface (GUI)
• Four synchronous step-down output channels
• Integrated RESET monitor
• +2.7V to +6.0V Input Range
• Highly accurate output voltage: <1.5%
• Factory programmable dead times
• 0% to 100% Duty Cycle operation
• Undervoltage Lockout (UVLO) with hysteresis
• 250kHz (SMB117A), 400kHz (SMB117), 800kHz
(SMB113A), 1MHz (SMB113B) operating frequency
• 96 bytes of user configurable nonvolatile memory
Applications
• Car & Marine Navigation Systems
• Set-top Boxes
• TVs
• DDR Memory
• Mobile Computing/PDAs
• Office Equipment
• DMB Systems
SIMPLIFIED APPLICATIONS DRAWING
INTRODUCTION
The SMB113A/B and SMB117/A are highly integrated and
flexible four-channel power managers designed for use in a
wide range of applications. The built-in digital programmability
allows system designers to custom tailor the device to suit
almost any multi-channel power supply application from digital
camcorders to set-top boxes. Complete with a user friendly
GUI, all programmable settings, including output voltages and
input/output voltage monitoring, can be customized with ease.
The SMB113A/B and SMB117/A integrate all the essential
blocks required to implement a complete four-channel power
subsystem consisting of four synchronous step-down “buck”
controllers. Additionally sophisticated power control/monitoring
functions required by complex systems are built-in. These
include digitally programmable output voltage set point, power-
up/down sequencing, enable/disable, dynamic voltage
management and UV/OV monitoring on all channels.
The integration of features and built-in flexibility of the
SMB113A/B and SMB117/A allows the system designer to
create a “platform solution” that can be easily modified via
software without major hardware changes. Combined with the
re-programmability of the SMB113A/B and SMB117/A, this
facilitates rapid design cycles and proliferation from a base
design to future product generations.
The SMB113A/B and SMB117/A are suited to a wide variety of
applications with an input range of +2.7V to +6.0V. Higher
input voltage operation can easily be implemented with a small
number of external components. Output voltages are
extremely accurate (<1.5%). Communication is accomplished
via the industry standard I²C bus. All user-programmed
settings are stored in non-volatile EEPROM of which 96 bytes
may be used as general-purpose memory. The devices are
offered in both the commercial and the industrial operating
temperature range. The package type is a lead-free, RoHS
compliant, 5x5 QFN-32.
+2.7V to +6.0V
or
Li-Ion
I2C/SMBus
Enable Input
Reset Input
RESET Output
(Power Good)
SMB113A/B
System
Control
and
Monitoring
4 Step-
Down
(Buck)
Channels
RESET
Monitor
+0.5V to Vin (Prog.) @ 1.5A/5A
CPU Core
+0.5V to Vin (Prog.) @ 1.5A/5A _{Memory, I/O}
+0.5V to Vin (Prog.) @ 1.5A/5A _DSP/Codec
+0.5V to Vin (Prog.) @ 1.5A/5A
Analog/RF
+2.7V to +6.0V
or
Li-Ion
I2C/SMBus
Enable Input
Reset Input
RESET Output
(Power Good)
SMB117/A
System
Control
and
Monitoring
4 Step-
Down
(Buck)
Channels
RESET
Monitor
+0.5V to Vin (Prog.) @ 5A/10A
CPU Core
+0.5V to Vin (Prog.) @ 5A/10A _{Memory, I/O}
+0.5V to Vin (Prog.) @ 5A/10A
DSP/Codec
+0.5V to Vin (Prog.) @ 5A/10A
Analog/RF
Figure 1 – Applications schematic featuring the SMB113A/B/117/A programmable DC-DC controllers.
Note: This is an applications example only. Some pins, components and values are not shown.
© SUMMIT Microelectronics, Inc. 2007
757 N. Mary Avenue • Sunnyvale CA 94085
http://www.summitmicro.com/
2111 2.4 6/24/2008
Phone [phone] • FAX [phone]
1