SFC1015 Datasheet, PDF (1/1 Pages) Sumida Corporation – EMC CHOKE COIL

EMC CHOKE COIL <PIN Type: SFC Series>
Type: SFC1015
◆ Product Description
・16.0×11.5mm Max.(L×W), 20.0mm Max. Height .
・Inductance range: 2.0mH
・Rated current range: 1.3A
・In addition to the standard versions of parameters shown here, custom
designs are available to meet your exact requirements.
◆ Feature
・Ideally used as noise filter chokes for power suppy circuit(secondary) of FAX machine in high
frequency range.
・RoHS Compliance
◆ Dimensions (mm)
11.5 MAX.
20.0 MAX.
◆ Schematics (Bottom)
3.0±0.5
5.08±0.1
②
③
1
2
S①
④S
4
3
“S”is winding start
＊Dimension does not include solder used on coil.
＊ Terminal pitch is measured at the base(not from tip of the pin)
◆ Specification
Part No. SFC1Ø15NP-2Ø2
Inductance (1-2) or (4-3)
D.C.R. (1-2) or (4-3)
Rated current (1-4) ※1
2.0mH MIN.
250mΩ MAX.
1.3A(1.6ATYP.)
Measuring conditions
1kHz,0.1V
at 20℃
2 and 3 to be shorted
※1.Rated current:The DC current at which the temperature rise is △t＝40℃.(Ta＝20℃).
Please refer to the sales offices on our website for a representative near you
www.sumida.com
1/1