PFN1515 Datasheet, PDF (1/1 Pages) Sumida Corporation – EMC Choke Coil

EMC Choke Coil<Pin Type: PFN Series >
Type: PFN1515/MS
◆ Product Description
・ 17.0mm×10.5mm Max.(L×W), 18.0mm Max. Height
・In addition to the typical versions of parameters shown here,
custom parameters are available to meet your exact requirements.
◆ Feature
・Iron dust core is used to realize better DC Saturation characteristics and higher noise
absorption effect.
・Less leakage magnetic flux .
・Ideally used as Normal Mode chokes EMI suppression in power supplies or signal lines.
・Elimination for impulse noise.
・RoHS Compliance
◆ Dimensions (mm)
MAX. 17.0
MAX.10.5
10.0±1.0
1.2MAX.
Indicate adhesive
1.0±0.1
6.0±0.5
◆ Specification
Part Name
136Ø66
136Ø67
E145944
E146133
Inductance
ï¼»Withinï¼½
200kHz/1V
4.5μH±10%
6.5μH±10%
10.0μH±20%
19.0μH±10%
Inductance
［Within］(μH)
3.5 Ref. (200kHz/1V, DC8.0A)
5.3 Ref. (200kHz/1V, DC5.0A)
3.0 Min. (100kHz/1V, DC7.0A)
11.7 Ref. (200kHz/1V, DC6.0A)
D.C.R.(mΩ)
Max.
(at 20℃)
7.0
10.0
15.0
30.0
Rated current
(A)※1
11.0
9.6
7.0
6.0
※1. Rated current: The DC current at which the temperature rise is △t＝40℃(Ta＝20℃).
Please refer to the sales offices on our website for a representative near you
www.sumida.com
1/1