PFN1329 Datasheet, PDF (1/1 Pages) Sumida Corporation – EMC Choke Coil

EMC Choke Coil<Pin Type: PFN Series>
Type: PFN1329
◆ Product Description
・ ￠30.0mm×13.0mm Max.
・In addition to the typical versions of parameters shown here,
custom parameters are available to meet your exact requirements.
◆ Feature
・Iron dust core is used to realize better DC Saturation characteristics and higher noise
absorption effect.
・Less leakage magnetic flux .
・Ideally used as Normal Mode chokes EMI suppression in power supplies or signal lines.
・Elimination for impulse noise.
・RoHS Compliance
◆ Dimensions (mm)
φ30.0 Max.
13.0 Max.
Solder
φ1.10 Max.
◆ Specification
Part Name.
Inductance D.C.R.(mΩ)
(μH) [MIN.] [MAX.]
At 1kHz
(at20℃)
PFN1329NP-NM42A
52
30
PFN1329NP-NM53A
83
38
Impedance [MIN.]
①
1150Ω
ａt 3MHz
1360Ω
ａt 2MHz
②
1980Ω
ａt 4MHz
3485Ω
ａt 3MHz
③
2290Ω
ａt 6MHz
2850Ω
ａt 4MHz
※1. Rated current: The DC current at which the temperature rise is △t＝40℃.(Ta＝20℃).
Rated
Current
(A)※1
6.1
5.4
Please refer to the sales offices on our website for a representative near you
www.sumida.com
1/1