PFN1316 Datasheet, PDF (1/1 Pages) Sumida Corporation – EMC Choke Coil

EMC Choke Coil<Pin Type: PFN Series>
Type: PFN1316
◆ Product Description
・18.5mm×14.5mm Max.(L×W), 20.5mm Max. Height .
・In addition to the typical versions of parameters shown here,
custom parameters are available to meet your exact requirements.
◆ Feature
・Iron dust core is used to realize better DC Saturation characteristics and higher noise
absorption effect.
・Less leakage magnetic flux .
・Ideally used as Normal Mode chokes EMI suppression in power supplies or signal lines.
・Elimination for impulse noise.
・RoHS Compliance
◆ Dimensions (mm)
φ16.5 MAX.
18.5 MAX.
10.5
14.5 MAX.
SOLDER
φ0.65 MAX.
ADHESIVE
◆ Specification
Part Name.
Inductance D.C.R.(mΩ)
(μH) [MIN.] [MAX.]
At 1kHz
(at20℃)
PFN1316NP-NM29A
21
43
PFN1316NP-NM39A
37
58
Impedance [MIN.]
①
544Ω
ａt 5MHz
1245Ω
ａt 5MHz
②
1180Ω
ａt 10MHz
2070Ω
ａt 7MHz
③
1245Ω
ａt 20MHz
950Ωａt
15MHz
※1. Rated current: The DC current at which the temperature rise is △t＝40℃.(Ta＝20℃).
Rated
Current
(A)※1
5.4
2.9
Please refer to the sales offices on our website for a representative near you
www.sumida.com
1/1