PFN0716 Datasheet, PDF (1/1 Pages) Sumida Corporation – EMC Choke Coil

EMC Choke Coil<Pin Type: PFN Series>
Type: PFN0716
◆ Product Description
・￠16.5mm×8.0mm. Max
・In addition to the typical versions of parameters shown here,
custom parameters are available to meet your exact requirements.
◆ Feature
・Iron dust core is used to realize better DC Saturation characteristics and higher noise
absorption effect.
・Less leakage magnetic flux.
・Ideally used as normal mode chokes EMI suppression in power supplies or signal lines.
・Elimination for impulse noise.
・RoHS Compliance
◆ Dimensions (mm)
φ16.5 MAX.
8.0 MAX.
SOLDER
φ0.65 MAX.
◆ Specification
Part Name.
PFNØ716NP-NM29A
PFNØ716NP-NM39A
Inductance
(μH) [MIN.]
At 1kHz
21
37
D.C.R.(mΩ)
[MAX.]
(at20℃)
43
58
Impedance [MIN.]
①
544Ω
ａt 5MHz
1245Ω
ａt 5MHz
②
1180Ω
ａt 10MHz
2070Ω
ａt 7MHz
③
1245Ω
ａt 20MHz
950Ω
ａt 15MHz
※1. Rated current: The DC current at which the temperature rise is △t＝40℃.(Ta＝20℃).
Rated
Current
(A)※1
5.4
2.9
Please refer to the sales offices on our website for a representative near you
www.sumida.com
1/1