MT2412 Datasheet, PDF (1/1 Pages) Sumida Corporation – MODEM Transformer

MODEM Transformer< Pin Type: MT Series>
Type: MT2412
◆ Product Description
・26.0×24.0mm Max.(L×W),12.0mm Max. Height.
・Operating frequency: 4MHz Max.
◆ Feature
・International safety standard approved for reinforced isolation.
・Silicone Steel is used.
・Ideally used in set-top box,FAX,MODEM.
・V.92(56kbps) to V.32bis(14.4kbps).
・RoHS Compliance.
◆ Dimensions (mm)
◆ Land Pattern (mm)
◆ Schematics(Bottom)
◆ Specification(Part Number:MIT-125)
“S”is winding start.
Parameters
Impedance
Dc resistance (1-2)
Dc resistance (4-3)
Turns ratio (1-2):(4-3)
Insertion loss
Return loss
Total harmonic distortion
Dielectric strength (1-2) to (4-3)
Specification
600Ω
374Ω
108Ω±10Ω Within
120Ω±12Ω Within
1:1 (±2%) Within
2.25dB Max
20dB Min.
-82dB TYP.
AC 1250Vrms
Condition
Reflected on primary, with a load on secondary
Ambient temperature 20℃
Ambient temperature 20℃
1kHz,1.0Vrms
1kHz,-10dBm
1kHz,-10dBm
600Hz,-10dBm
50Hz /60Hz, 0.2mA 2Sec
Please refer to the sales offices on our website for a representative near you
www.sumida.com
1/1