KM-10DB Datasheet, PDF (1/4 Pages) Sumida Corporation – Filter Coils

Filter Coils < Pin Type: KM Series>
Type: KM-10DB, KM-10DF, KM-10DG
Product Description
11.0 11.0mm Max.(L W), 16.0mm Max. Height (KM-10DB),
10.5 10.5mm Max.(L W), 16.0mm Max. Height (KM-10DF, KM-10DG),
Operating frequency:1.0MHz.
In addition to the reference versions of parameters shown here,
custom designs are available to meet your exact requirements
Feature
Variable shielded type.
Two capacitors can be internally mounted in one section.
Ideally used as Dobly filters or two-pole type audio low pass filters in Audio Radio Sets.
Can be also used as IFT coils.
RoHS Compliance
Dimensions (mm)
KM-10DB
KM-10DF
KM-10DG
Dimension does not include solder used on coil.
Pin pitch should be measured at the root of terminal.
Please refer to the sales offices on our website for a representative near you
www.sumida.com
1/1