CPFC85-1M15NP Datasheet, PDF (1/1 Pages) Sumida Corporation – Common Mode Choke SMD Type: CPFC Series

Common Mode Choke <SMD Type: CPFC Series>
Type: CPFC85
◆ Product Description
・ × × 9.3 8.2mm Max.(L W), 5.5mm Max. Height.
◆ Feature
・Ideally used as EMC and xDSL CO common mode choke.
・RoHS Compliance.
◆ Dimensions (mm)
9.1±0.2
5.5 MAX.
0.5
9.1±0.2
1.8
7.2±0.1
0.2
0.2
0.3
8.0±
3.4±
6.9±
0.05±0.05
0.9
◆ Land Pattern (mm)
1.5
6.5
2.5
3.0
2.8
2.0
2.5
◆ Schematics (Bottom)
1.5
②
③
②
③
①
④
MARK OF POLARITY
For partname: CPFC85NP-100M03
CPFC85NP-100M10
①
④
Mark of polarity
For partname: CPFC85-1M15NP
SILK SCREEN
◆ Specification (For xDSL CO)
Part Name
Core
Material
Stamp
Ω^Impedance
(K )<Min.>
<REF.> (1-4),(2-3)
Ω^D.C.R.
(m )<Max.>
(1-4),(2-3)
※ ^{Rated current}
(1-2)(A) 1
(3-4) shorted
CPFC85NP-100M03
Ni-Zn
0M03
0.3(@100MHz)
20
5.0
CPFC85NP-100M10
Ni-Zn
0M10
1.0(@100MHz)
25
3.0
※ △ ＝ ℃ ＝ ℃ 1.Rated current: The DC current at which the temperature rise is t 40 .(Ta 20 ).
Specification (For EMC)
Part Name
Core
Material
Stamp
Inductance
(1-4),(2-3)
@ 100kHz
Common mode
attenuation(1-4,2-3)
※ ^D.C.R.
(1-2) 2
Isolation voltage
(3-4), 1 minute
CPFC85-1M15NP Mn-Zn 1M15
4.7mH±30%
Within
30dB(Typ.)@100kHz
43dB(Typ.)@1MHz
34dB(Typ.)@10MHz
Ω 2.0 Max.
℃ at 20
(3-4)shorted
500Vrms AC
※ 2. D.C.R. is measured by 2 lines as series because impedance will be deteriorated when D.C.R. is measured by 1 line.
Please refer to the sales offices on our website for a representative near you
www.sumida.com
1/1