|
CDMC50D38 Datasheet, PDF (1/4 Pages) Sumida Corporation – LED Head light for Automobile | |||
|
CDMC50D38/T150
RoHS
Dimension - [mm]
5.4±0.4
4.0 Max.
1.2±0.4 3.0 1.2±0.4
Features
⢠Metal compound molding type construction.
⢠Magnetically shielded.
⢠Qualified AEC-Q200
⢠Suitable for Large Current
⢠Operating temperature range: - 40deg Cï½+150deg C
(including coilâs self temperature rise)
Applications
⢠LED Head light for Automobile
⢠ECU for Airbag, Water and Oil pump etc
⢠DC/DC converter
Reference Land pattern- [mm]
7.2
2.2
:Electrode
Electrical Characteristics
Part No.
Inductance (μH)
(±20ï¼
)
ï¼1
CDMC50D38T150NP -1R0MC
1.05
CDMC50D38T150NP -1R5MC
1.50
CDMC50D38T150NP -2R5MC
2.50
CDMC50D38T150NP -3R0MC
3.00
CDMC50D38T150NP -4R7MC
4.70
CDMC50D38T150NP -6R8MC
6.80
CDMC50D38T150NP -100MC
10.0
CDMC50D38T150NP -150MC
15.0
CDMC50D38T150NP -220MC
22.0
ï¼1 Inductance Measuring frequency: 100kHz, 0.1V
D.C.R. (mâ¦)
at 20degC
(±10%)
16.5
20.0
27.3
30.5
41.0
51.3
76.6
120.8
180.8
Saturation Current
(A) ï¼2
at 20degC
11.5
9.8
8.0
7.5
6.3
5.4
4.4
3.6
3.0
at 110degC
10.0
9.0
7.5
6.9
5.8
4.9
4.1
3.3
2.7
at 150degC
10.0
8.9
7.4
6.8
5.7
4.8
4.0
3.2
2.7
Temperature
Rise current
(A) ï¼3
6.5
5.9
5.1
4.8
4.1
3.6
2.9
2.3
1.8
ï¼2 Saturation current: DC current which becomes inductance value drop down to 30% from the initial value.
ï¼3 Temperature rise current : DC current which becomes â¿T=40â(Ta=20â) in component body temperature.
Board conditions: FR4, Copper=70μm, four-layer PWB, t=1.6mm
ï¼In order to select the proper inductor for your circuit design, it should be checked the inductor rated current for heat generation in the
worst case. Under normal operational condition, it shall not exceed the maximum operating temperature (150 deg C.)
ï¼Allowable current of inductor is either saturation current or temperature rise current, whichever is lower.
ï¼Absolute maximum voltage 40V DC.
ï¼Take the static electricity measures to prevent deterioration of electric characteristics.
Note: This datasheet might be slightly modified without notice in order to improve the quality and reliability of the product. Please contact
an appropriate our sales in your regions for checking final spec before you place an order.
Page 1 of 4
Rev. 4 (2014.10)
|
▷ |