English
Language : 

CDMC10D50 Datasheet, PDF (1/6 Pages) Sumida Corporation – LED Head light for Automobile
CDMC10D50/T150
PROVISIONAL
RoHS
Dimension - [mm]
Features
• Metal compound molding type construction.
• Magnetically shielded.
• Qualified AEC-Q200
• Suitable for Large Current
• Operating temperature range: - 40deg C~+150deg C
(including coil’s self temperature rise)
Applications
• LED Head light for Automobile
• ECU for Airbag, Water and Oil pump etc
• DC/DC converter
Reference Land pattern- [mm]
Electrical Characteristics
Part No.
Inductance (μH)
(±20%)
*1
D.C.R. (mΩ)
at 20degC
(±10%)
CDMC10D50T150NP-1R1MC
1.1
3.3
CDMC10D50T150NP-1R6MC
1.6
4.1
CDMC10D50T150NP-2R2MC
2.2
5.1
CDMC10D50T150NP-2R7MC
2.7
6.0
CDMC10D50T150NP-3R3MC
3.3
6.8
CDMC10D50T150NP-4R3MC
4.3
10.0
*1 Inductance Measuring frequency: 100kHz, 0.1V
at 20degC
32.0
26.8
24.4
21.0
18.6
15.9
Saturation Current
(A) *2
at 110degC
30.0
at 150degC
30.0
24.5
24.3
22.4
22.2
19.6
19.2
17.3
17.0
14.7
14.6
Temperature
Rise Current
(A) *3
19.1
16.9
15.9
14.5
14.0
10.7
*2 Saturation current: DC current which becomes inductance value drop down to 30% from the initial value.
*3 Temperature rise current : DC current which becomes ⊿T=40 deg C (Ta=20 deg C) in component body temperature.
Board conditions: FR4, Copper=70μm, four-layer PWB, t=1.6mm
*In order to select the proper inductor for your circuit design, it should be checked the inductor rated current for heat generation in the
worst case. Under normal operational condition, it shall not exceed the maximum operating temperature (150 deg C.)
*Allowable current of inductor is either saturation current or temperature rise current, whichever is lower.
*Absolute maximum voltage 40V DC.
*Take the static electricity measures to prevent deterioration of electric characteristics.
Note: This datasheet might be slightly modified without notice in order to improve the quality and reliability of the product. Please contact
an appropriate our sales in your regions for checking final spec before you place an order.
Page 1 of 3
Rev.3(2014.10)