STM32F103X4_13 Datasheet, PDF (88/90 Pages) STMicroelectronics – Low-density performance line, ARM-based 32-bit MCU with 16 or32 KB Flash, USB

Revision history
STM32F103x4, STM32F103x6
Table 58. Document revision history (continued)
Date
Revision
Changes
Note 5 updated and Note 4 added in Table 5: Low-density
STM32F103xx pin definitions.
V_RERINT and T_Coeff added to Table 12: Embedded internal reference
voltage. Typical I_{DD_VBAT} value added in Table 16: Typical and maximum
current consumptions in Stop and Standby modes. Figure 15: Typical
current consumption on VBAT with RTC on versus temperature at
different VBAT values added.
f_{HSE_ext} min modified in Table 20: High-speed external user clock
characteristics.
C_L1 and C_L2 replaced by C in Table 22: HSE 4-16 MHz oscillator
characteristics and Table 23: LSE oscillator characteristics (fLSE =
24-Sep-2009
3
32.768 kHz), notes modified and moved below the tables. Table 24: HSI
oscillator characteristics modified. Conditions removed from Table 26:
Low-power mode wakeup timings.
Note 1 modified below Figure 21: Typical application with an 8 MHz
crystal.
Figure 28: Recommended NRST pin protection modified.
Jitter added to Table 27: PLL characteristics on page 51.
IEC 1000 standard updated to IEC 61000 and SAE J1752/3 updated to
IEC 61967-2 in Section 5.3.10: EMC characteristics on page 52.
C_ADC and R_AIN parameters modified in Table 46: ADC characteristics.
R_AIN max values modified in Table 47: RAIN max for fADC = 14 MHz.
Small text changes.
Added VFQFPN48 package.
Updated note 2 below Table 40: I2C characteristics
20-May-2010
4
Updated Figure 29: I2C bus AC waveforms and measurement circuit
Updated Figure 28: Recommended NRST pin protection
Updated Section 5.3.12: I/O current injection characteristics
19-Apr-2011
Updated footnotes below Table 6: Voltage characteristics on page 31
and Table 7: Current characteristics on page 32
Updated tw min in Table 20: High-speed external user clock
characteristics on page 45
5
Updated startup time in Table 23: LSE oscillator characteristics (fLSE =
32.768 kHz) on page 48
Added Section 5.3.12: I/O current injection characteristics
Updated Section 5.3.13: I/O port characteristics
88/90
Doc ID 15060 Rev 6