STM8AL313X Datasheet, PDF (85/124 Pages) STMicroelectronics – Automotive 8-bit ultra-low-power MCU, up to 32 Kbyte Flash, RTC, data EEPROM, LCD, timers, USART, I2C, SPI, ADC, DAC, COMPs

STM8AL313x/4x/6x STM8AL3L4x/6x
Electrical parameters
Output driving current
Subject to general operating conditions for V_DD and T_A unless otherwise specified.
I/O
Type
Symbol
Table 42. Output driving current (high sink ports)
Parameter
Conditions Min
Max Unit
I_IO = +2 mA,
V_DD = 3.0 V
-
0.45
V_OL ⁽¹⁾ Output low level voltage for an I/O pin
I_IO = +2 mA,
V_DD = 1.8 V
-
0.45 V
I_IO = +10 mA,
V_DD = 3.0 V
-
0.7
I_IO = -2 mA,
V_DD = 3.0 V
V_DD-0.45
-
V_OH ⁽²⁾ Output high level voltage for an I/O pin
I_IO = -1 mA,
V_DD = 1.8 V
V_DD-0.45
-
V
I_IO = -10 mA,
V_DD = 3.0 V
V_DD-0.7
-
1.
TofhIe_IOI_{IO(I/Ocuprroerntst}
sunk must always respect the absolute maximum
and control pins) must not exceed I_VSS.
rating
specified
in
Table
16
and
the
sum
2.
The
sum
Io_IOf
current sourced must always respect the absolute maximum
I_IO (I/O ports and control pins) must not exceed I_VDD.
rating
specified
in
Table
16
and
the
Table 43. Output driving current (true open drain ports)
I/O
Type
Symbol
Parameter
Conditions Min Max Unit
V_OL ⁽¹⁾ Output low level voltage for an I/O pin
I_IO = +3 mA,
V_DD = 3.0 V
I_IO = +1 mA,
V_DD = 1.8 V
-
-
0.45
V
0.45
1.
TofhIe_IOI_{IO(I/Ocuprroerntst}
sunk must always respect the absolute maximum
and control pins) must not exceed I_VSS.
rating
specified
in
Table
16
and
the
sum
Table 44. Output driving current (PA0 with high sink LED driver capability)
I/O
Type
Symbol
Parameter
Conditions Min Max Unit
IR V_OL ⁽¹⁾ Output low level voltage for an I/O pin
I_IO = +20 mA,
V_DD = 2.0 V
-
0.45 V
1.
TofhIe_IOI_{IO(I/Ocuprroerntst}
sunk must always respect the absolute maximum
and control pins) must not exceed I_VSS.
rating
specified
in
Table
16
and
the
sum
DocID18474 Rev 7
85/124
108