UM1662 Datasheet, PDF (8/11 Pages) STMicroelectronics – Getting started with the STM32F429 Discovery kit

Firmware package
UM1662
2.2.1
2.2.2
Programming application
To program application (demonstration or example), follow the sequence below:
1. Go under application folder
2. Chose the desired IDE project
3. Double click on the project file (ex. STM32F429I-Discovery_Demo.eww for EWARM)
4. Rebuild all files: Project->Rebuild all
5. Load project image: Project->Debug
6. Run program: Debug->Go
Please refer to Getting started with STM32F429 Discovery software development tools
for more details.
Run pre-loaded demo
To run and develop any firmware applications on your STM32F429 Discovery board, the
minimum requirements are as follows:
– Windows PC (XP, Vista, 7)
– ‘USB type A to Mini-B' cable, used to power the board (through USB connector
CN1) from host PC and connect to the embedded ST-LINK/V2 for debugging and
Programming.
Additional hardware accessories will be needed to run some applications:
– ‘USB type A to Micro-B' cable, used to connect the board (through USB connector
CN5) as USB Device to host PC.
8/11
DocID025120 Rev 1