STGIPN3H60-H Datasheet, PDF (8/23 Pages) STMicroelectronics – 3-phase inverters for motor drives

Electrical characteristics
STGIPN3H60-H
3
Electrical characteristics
3.1
Inverter part
Symbol
VCE(sat)
ICES
VF
TJ = 25 °C unless otherwise specified.
Table 7: Static
Parameter
Test conditions
Collector-emitter saturation
voltage
VCC = Vboot = 15 V, VIN⁽¹⁾ = 0 to 5 V, IC = 1 A
VCC = Vboot = 15 V, VIN⁽¹⁾ = 0 to 5 V, IC = 1 A,
TJ = 125 °C
Collector-cut off current
(VIN⁽¹⁾ = 0 “logic state”)
VCE = 550 V, VCC = VBoot = 15 V
Diode forward voltage
VIN⁽¹⁾ = 0 “logic state”, IC = 1 A
Min.
-
-
-
-
Typ.
2.15
1.65
Max.
2.6
250
1.7
Unit
V
µA
V
Notes:
(1)_{Applied between HINi, LINi and GND for i = U, V, W.}
Symbol
ton⁽¹⁾
tc(on)⁽¹⁾
toff⁽¹⁾
tc(off)⁽¹⁾
trr
Eon
Eoff
Table 8: Inductive load switching time and energy
Parameter
Test conditions
Min.
Turn-on time
-
Crossover time (on)
VDD = 300 V,
-
Turn-off time
VCC = Vboot = 15 V,
-
Crossover time (off)
VIN⁽²⁾ = 0 to 5 V,
-
Reverse recovery time
IC = 1 A
-
Turn-on switching energy ^{(see Figure 4: "Switching time definition")}
-
Turn-off switching energy
-
Typ.
275
90
890
125
50
18
13
Max.
-
-
-
-
-
-
-
Unit
ns
µJ
Notes:
(1)_{tON and tOFF include the propagation delay time of the internal drive. tC(ON) and tC(OFF) are the switching time of IGBT itself under}
the internally given gate driving condition.
(2)_{Applied between HINi, LINi and GND for i = U, V, W.}
8/23
DocID024132 Rev 4