STM32F415ZGT6 Datasheet, PDF (77/186 Pages) STMicroelectronics – ARM Cortex-M4 32b MCU+FPU, 210DMIPS, up to 1MB Flash

STM32F415xx, STM32F417xx
Electrical characteristics
5.1.7
Current consumption measurement
Figure 22. Current consumption measurement scheme
IDD_VBAT
VBAT
IDD
VDD
5.2
VDDA
ai14126
Absolute maximum ratings
Stresses above the absolute maximum ratings listed in Table 11: Voltage characteristics,
Table 12: Current characteristics, and Table 13: Thermal characteristics may cause
permanent damage to the device. These are stress ratings only and functional operation of
the device at these conditions is not implied. Exposure to maximum rating conditions for
extended periods may affect device reliability.
Table 11. Voltage characteristics
Symbol
Ratings
Min
Max Unit
V_DD–V_SS External main supply voltage (including V_DDA, V_DD)⁽¹⁾
–0.3
4.0
Input voltage on five-volt tolerant pin⁽²⁾
V_IN
Input voltage on any other pin
V_SS–0.3 V_DD+4
V
V_SS–0.3
4.0
|ΔV_DDx| Variations between different V_DD power pins
|V_SSX − V_SS| Variations between all the different ground pins
-
50
mV
-
50
V_ESD(HBM) Electrostatic discharge voltage (human body model)
see Section 5.3.14:
Absolute maximum
ratings (electrical
sensitivity)
1. _{sAullpmplayi,ninpothweepr e(VrmDiDtt,eVdDrDaAn)gaen.} d ground (V_SS, V_SSA) pins must always be connected to the external power
2. Vin_{IjNecmteadxicmuurrmenvt.alue} must always be respected. Refer to Table 12 for the values of the maximum allowed
DocID022063 Rev 4
77/186