English
Language : 

STM8S005K6 Datasheet, PDF (72/103 Pages) STMicroelectronics – Value line, 16 MHz STM8S 8-bit MCU, 32 Kbytes Flash, data EEPROM,10-bit ADC, timers, UART, SPI, IC
◁
Electrical characteristics
STM8S005K6 STM8S005C6
9.3.6
I/O port pin characteristics
General characteristics
Subject to general operating conditions for VDD and TA unless otherwise specified. All unused
pins must be kept at a fixed voltage: using the output mode of the I/O for example or an
external pull-up or pull-down resistor.
Table 36: I/O static characteristics
Symbol Parameter
Conditions
Min Typ Max
Unit
VIL
Input low level
VDD = 5 V
voltage
-0.3
0.3 x VDD V
VIH
Input high level
voltage
Vhys
Hysteresis(1)
Rpu
Pull-up resistor VDD = 5 V, VIN = VSS
tR, tF
Rise and fall
Fast I/Os load = 50 pF
time(10 % - 90 %)
Standard and high sink
I/OsLoad = 50 pF
Ilkg
Input leakage
VSS ≤ VIN ≤ VDD
current, analog
and digital
Ilkg ana Analog input
leakage current
VSS ≤ VIN ≤ VDD
Ilkg(inj)
Leakage current in Injection current ±4 mA
adjacent I/O(2)
0.7 x
VDD
700
30 55
VDD + 0.3 V
V
mV
80
kΩ
35 (3)
ns
125 (3)
ns
±1.0 (2)
µA
±250 (2) nA
±1.0(2)
µA
(1) Hysteresis voltage between Schmitt trigger switching levels. Based on characterization
results, not tested in production.
(2) Data based on characterization results, not tested in production.
(3)Data guaranteed by design, not tested in production.
72/103
DocID022186 Rev 3
 ▷