P-NUCLEO-6180X2 Datasheet, PDF (7/8 Pages) STMicroelectronics – Power management access point

P-NUCLEO-6180X2
Laser consideration
Laser consideration
The VL6180X contains a laser emitter and corresponding drive circuitry. The laser output is
designed to remain within Class 1 laser safety limits under all reasonably foreseeable
conditions including single faults in compliance with IEC 60825-1:2007. The laser output will
remain within Class 1 limits as long as the STMicroelectronics recommended device
settings are used and the operating conditions specified in the datasheet are respected. The
laser output power must not be increased by any means and no optics should be used with
the intention of focusing the laser beam.
Figure 4. Class 1 laser product label
Compliance
Complies with 21 CFR 1040.10 and 1040.11 except for deviations pursuant to Laser Notice
No.50, dated June 24, 2007.
ECOPACK^®
In order to meet environmental requirements, ST offers these devices in different grades of
ECOPACK^® packages, depending on their level of environmental compliance. ECOPACK^®
specifications, grade definitions and product status are available at: www.st.com.
ECOPACK^® is an ST trademark.
Revision history
Date
19-Mar-2015
05-May-2015
02-Jun-2015
Table 4. Document revision history
Revision
Changes
1
Initial release.
2
Add ST cube logo on first page
3
Update Description section
DocID027625 Rev 3
7/8
8