LIS352AR Datasheet, PDF (7/15 Pages) STMicroelectronics – MEMS motion sensor: 3-axis 2 g analog-output

LIS352AR
3
Absolute maximum ratings
Absolute maximum ratings
Note:
Stresses above those listed as “absolute maximum ratings” may cause permanent damage
to the device. This is a stress rating only and functional operation of the device under these
conditions is not implied. Exposure to maximum rating conditions for extended periods may
affect device reliability.
Table 5. Absolute maximum ratings
Symbol
Ratings
Maximum value
Unit
Vdd Supply voltage
-0.3 to 6
V
Vin Input voltage on any control pin (PD, ST, S0, S1)
-0.3 to Vdd +0.3
V
V_{Aux_in} Aux_in input voltage
A_POW Acceleration (any axis, powered, Vdd=3.3 V)
A_UNP Acceleration (any axis, not powered)
-0.3 to Vdd +0.3
V
3000 g for 0.5 ms
10000 g for 0.1 ms
3000 g for 0.5 ms
10000 g for 0.1 ms
T_STG Storage temperature range
-40 to +125
°C
4 (HBM)
kV
ESD Electrostatic discharge protection
1.5 (CDM)
kV
200 (MM)
V
Supply voltage on any pin should never exceed 6.0 V.
This is a mechanical shock sensitive device, improper handling can cause permanent
damages to the part
This is an ESD sensitive device, improper handling can cause permanent damages to
the part
Doc ID 16933 Rev 1
7/15