LD39050XX Datasheet, PDF (7/24 Pages) STMicroelectronics – 500 mA low quiescent current low noise voltage regulator

LD39050xx
Electrical characteristics
Table 6. Electrical characteristics for the LD39050PU (continued)
Symbol
Parameter
Test conditions
Min. Typ. Max. Unit
Enable input logic low
V_EN
Enable input logic high
I_EN
t_ON
T_SHDN
Enable pin input current
Turn on time ⁽⁴⁾
Thermal shutdown
Hysteresis
C_OUT Output capacitor
V_IN=1.5 V to 5.5 V, 40°C<T_J<125°C
0.4
V
V_IN=1.5 V to 5.5 V, 40°C<T_J<125°C 0.9
V
V_EN= V_IN
0.1
100 nA
30
µs
160
°C
20
Capacitance (see typical
performance characteristics for
1
stability)
22
µF
1. All transient values are guaranteed by design, not production tested
2. Dropout voltage is the input-to-output voltage difference at which the output voltage is 100 mV below its nominal value. This
specification does not apply for output voltages below 1.5 V
3. PG pin floating
4. Turn-on time is time measured between the enable input just exceeding V_EN high value and the output voltage just
reaching 95% of its nominal value
7/24